Roland VC-30HD Manual Do Utilizador
23
Connecting External Equipment
Use [AES/EBU] connector on the rear panel for your digital audio source. For information
on the source selection, refer to “Audio Source Settings” (p. 28).
on the source selection, refer to “Audio Source Settings” (p. 28).
* The standard supported by the VC-30HD is AES3 (16 to 24 bits, 32 to 48 kHz, 2 channels).
fig.connect-AES-EBU.eps
At this time, set the [AUDIO IN] selector switch to [AES/EBU TIMECODE].
* When this setting is in effect, you can input AES/EBU digital audio and a timecode simultaneously
fig.select-AES-EBU.eps
PEAK indicator
This lights up when input from the audio source is too high. If it lights up, use the [SENS]
dial to lower the input sensitivity.
dial to lower the input sensitivity.
SIG indicator
This lights up when input from the audio device is adequate.
SENS dial
This adjusts the audio input sensitivity of the VC-30HD. For information on input levels,
refer to “Main Specifications” (p. 29).
refer to “Main Specifications” (p. 29).
fig.SIG-PEAK-GAIN.eps
Making a Digital Connection
The PEAK/SIG Indicators and the SENS Dial