Hitachi 19VR11B Manual Do Utilizador

NORMAL PLAYBACK 

 

34

Make sure... 
• Power must be turned on. 

1 Insert a prerecorded tape 
If the erase-protection tab has been removed, the TV/VCR will start playback 
automatically 

2 To begin playback 

 

Press PLAY button. 

3 To stop playback 

 

Press STOP button when playback is completed. 

• Tracking adjustment will be set automatically (Digital Tracking function-DTR) 
when you start playback. 

NOTE: The following function is controlled only by the buttons on the VCR. 

• When playing pre-recorded tapes or tapes recorded on units other than your own, 
noise lines (black and white streaks) may appear on the playback picture. If this 
occurs, you can adjust the tracking control manually by pressing CH 

 or 

button 

until the streaks disappear. To return to the DTR function, stop the tape once and start 
playback again. 
• You can reduce the noise lines by pressing CH 

 or 

button in slow mode, too. 

Slow tracking adjustment will not be set automatically. 

Note: In Still mode, press SLOW button and press CH 

 or 

button until the streaks 

disappear. To return to Still mode, press PAUSE/STILL button again.