Hitachi 19VR11B Manual Do Utilizador
RECORDING
44
COPYING A VIDEO CASSETTE (Requires another VCR)
Connect your TV/VCR and a Source (Playing) VCR using the following diagram.
1) Insert a pre-recorded video cassette into the Source (Playing) VCR.
2) Insert a blank video cassette, or one you want to record over, into the TV/VCR's
cassette compartment.
3) Press SPEED button to select the desired recording speed (SP, LP or SLP).
4) Press CHANNEL
2) Insert a blank video cassette, or one you want to record over, into the TV/VCR's
cassette compartment.
3) Press SPEED button to select the desired recording speed (SP, LP or SLP).
4) Press CHANNEL
or
button repeatedly so that "AUX" appears on the
screen.
5) Begin playback of the tape in the Source (Playing) VCR.
6) Press REC button on the TV/VCR.
5) Begin playback of the tape in the Source (Playing) VCR.
6) Press REC button on the TV/VCR.
NOTE:
• For best results during dubbing, use the TV/VCR's front panel controls whenever
possible. The remote control might affect the Source (Playing) VCR's playback
operation.
• When you connect the monaural TV/VCR (another source) to this TV/VCR, connect
the Audio output to the AUDIO IN L jack of this VCR. The audio signal will be recorded
in both L and R channel equally.
• For best results during dubbing, use the TV/VCR's front panel controls whenever
possible. The remote control might affect the Source (Playing) VCR's playback
operation.
• When you connect the monaural TV/VCR (another source) to this TV/VCR, connect
the Audio output to the AUDIO IN L jack of this VCR. The audio signal will be recorded
in both L and R channel equally.