Peerless Industries PF632 Manual Do Utilizador

ISSUED: 11-19-07  SHEET #: 202-9248-6   11-04-09

•  If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly 

secured, damage may occur to screen or product may fail.

Choose hole pattern as shown in detail 2 for VESA 
200 x 100, 120 x 180 or 200 x 200 mounting pattern 
and for fasteners to use. Attach mounting plate (B) to 
back of screen using four screws (F, G, J, K, or L) as 
shown.

NOTE: Be certain bottom flanges of mounting plate 
face toward bottom of screen. 

*NOTE: If hole pattern is in a pocket, attach mounting 
plate (B) to back of screen using four M4 x 20 mm 
screws (G) and four retaining spacers (H) as indicated.

NOTE: If screw (J) gets less than three threads of 
engagement, attach mounting plate (B) to back of 
screen using four M6 x 20 mm screws (K). If screw (K) 
still gets less than three threads of engagement, use 
four M6 x 30 mm screws (L).

2

BOTTOM 
FLANGES

SCREEN

M4 x 10 mm screws (F) or  

M4 x 20 screws (G) with spacer (H)

M4 x 10 mm screws (F) or  

M4 x 20 screws (G) with spacer (H)

M6 x 12 mm screws (J),  

M6 x 20 mm screws (K) or  

M6 x 30 mm screws (L)

NOTE:  Fastener selection may vary for specific screens. If you have any questions for the correct fasteners to use for your 

particular screen, call customer care.

*For screens with a 
hole pattern in a pocket, 
spacers (H) go between 
mounting plate (B) and 
screen when using 
screws (G).