Samsung NBNH Manual Do Utilizador

Using "PCoIP"

2 Using "PCoIP"

IP Address

The IP address of the device. If DHCP is disabled, you must set this field to a valid IP address. If

DHCP is enabled, you cannot edit this field.

Subnet Mask

The subnet mask of the device. If DHCP is disabled, you must set this field to a valid subnet mask. If

DHCP is enabled, you cannot edit this field.

It is possible to configure an illegal IP address/subnet mask combination (e.g., invalid mask)

making the device unreachable. Ensure you set the subnet mask properly.

Gateway

The gateway IP address of the device. If DHCP is disabled, this field is required. If DHCP is enabled,

you cannot edit this field.

Primary DNS Server

The primary DNS IP address of the device. This field is optional. If the DNS server IP address is

configured using the Connection Manager, the address may be set as an FQDN instead of an IP

address.

Secondary DNS Server

The secondary DNS IP address of the device. This field is optional. If the DNS server IP address is

configured using the Connection Manager, the address may be set as an FQDN instead of an IP

address.

Domain Name

The domain name used (e.g., 'domain.local'). This field is optional. This field specifies the host or

domain of the client.

FQDN

The Fully Qualified Domain Name for the host or client. The default value is pcoip-host-<MAC> or

pcoipportal-<MAC> where <MAC> is the MAC address of the host or client. The domain name is

appended if used (e.g., pcoip-host-<MAC>.domain.local). This field is read-only on this page.

Ethernet Mode

Lets you configure the Ethernet mode of the host or client as:

Auto

100 Mbps Full-Duplex

10 Mbps Full-Duplex

When you choose

10 Mbps Full Duplex

100 Mbps Full Duplex

and then click

Apply

, a warning

message will appear.

"Warning: When Auto-Negotiation is disabled on the PCoIP device, it must also be disabled on the

switch. Additionally, the PCoIP device and switch must be configured to use the same speed and

duplex parameters. Different parameters may result in a loss of network connectivity. Are you sure

you want to continue?"

Click OK to change the parameter.