Unitron Hearing Aid UMIC Manual Do Utilizador

Most probable cause

Remedy

There is too much noise, I cannot understand the

speaker
Your hearing aid

microphones are set

too loud

Reduce the hearing aid

volume by pressing the

uDirect 2 (

) key until you

reach a comfortable level.

Place the uMic closer to the

speakers mouth (20 cm, 8’’).

Use the uMic (

) button to

increase the uMic volume

The uMic rubs against

the wearer’s clothing

Make sure the uMic is clipped

firmly. Clothing should not

cover the uMic

The settings of your

hearing aids are not right

Please ask your hearing

healthcare professional to

fine tune your hearing aids

Most probable cause

Remedy

uMic is no longer recognized by the uDirect 2 with which

it was previously paired
2 minutes after no device

was found, uDirect 2

stops seeking devices to

save power

Switch uDirect 2 off. Wait until

the red power indicator turns

off, then turn device on again

The devices are too far

away from each other

Bring devices within 1 meter

range and try again

uMic can be paired to a

maximum of 4 different

Bluetooth devices

(uDirect 2 can be paired

to 8). If the internal

memory is full, the fifth

pairing will delete the

first pairing

Repeat the pairing between

the devices

Pairing was never done,

or it was manually

deleted

Repeat the pairing between

the devices

The light indicator does not turn solid blue
uMic and uDirect 2 are

not paired

Repeat the pairing between

the devices