Emerson 7003M Manual Do Utilizador
Operator Manual
748223-K
June 2002
June 2002
3-4 Operation
Rosemount Analytical Inc. A Division of Emerson Process Management
Model 7003M
b. Display
Prompts
The Model 7003M prompts the operator
for inputs and also indicates the function
for inputs and also indicates the function
in progress. For example, when entering
the calibration mode, the prompt "CAL" is
displayed for one second after the CAL
key is pressed. Display acronyms are
listed in Table 3-3 through Table 3-9.
the calibration mode, the prompt "CAL" is
displayed for one second after the CAL
key is pressed. Display acronyms are
listed in Table 3-3 through Table 3-9.
CODE
DEFINITION
id
enter security code prompt
no
invalid security code entered - access denied
YES
access granted or security code entered is correct
Table 3-3.
Security Access Prompts and Responses
CODE
DEFINITION
A-1
setpoints for Alarm 1 - ALARM function
A-2
setpoints for Alarm 2 - ALARM function
C-1
setpoints for Alarm 1 - ON/OFF - Controller function
C-2
setpoints for Alarm 2 - ON/OFF - Controller function
On
value in which to initiate an Alarm Action (On-setpoint)
OFF
value in which to terminate an Alarm Action (Off-setpoint)
dis
Alarm is now disabled
Table 3-4.
Alarm Settings Prompts and Responses
CODE
DEFINITION
CAL
initiate a span calibration
PPr
enter process pressure value
CPr
enter calibration pressure value
GAS
Initiate a zero offset calibration (gas)
Table 3-5.
Calibration Prompts and Responses
CODE
DEFINITION
Set
enter system setup mode
4-0
define the current output as 4-20 or 0-20 mA
CLo
% concentration that 0/4 mA represents (calibration low)
CHi
% concentration that 20 mA represents (calibration high)
Table 3-6.
System Setup Prompts and Responses