Invacare XPO100B Manual Do Utilizador
SECTION 6—OPERATING INSTRUCTIONS
31
Invacare XPO
2
™
FIGURE 6.8 Connecting/Positioning the Nasal Cannula
Adjusting the Pulse Flow Setting
CAUTION
It is very important to select the prescribed level of oxygen
flow. DO NOT increase or decrease the flow unless a change
has been prescribed by your physician or therapist.
flow. DO NOT increase or decrease the flow unless a change
has been prescribed by your physician or therapist.
NOTE: For this procedure, refer to FIGURE 6.9 on page 32.
1. Turn On the XPO
2
by pressing and holding the power
On/Off button for approximately one second. Each time
the XPO
the XPO
2
is turned On, a brief alarm will sound. The XPO
2
pulse flow setting at power‐up will be the same flow
setting selected the last time the unit was turned Off.
setting selected the last time the unit was turned Off.
2. The XPO
2
has five pulse flow settings. Press the flow
selection (+ or ‐) button until your prescribed flow setting
(1 to 5) is illuminated by a blue indicator light.
(1 to 5) is illuminated by a blue indicator light.
Nasal
Cannula
Oxygen
Outlet Port
DETAIL
“A”
DETAIL “B”