Dialogic DIVA V-4PRI/E1/T1-120 306-403 Ficha De Dados

Códigos do produto
306-403
Página de 8
Dialogic
®
 Diva
®
 V-xPRI Media Boards
Datasheet
Diva Media Boards
3
Quick Reference
Voice resources 
 
All channels
Fax resources (Fax)   
 All channels via Fax licenses (V.34 speeds are only possible on part of the channels when using the Diva 
V-4PRI/E1/T1-120 HS or the Diva V-8PRI/E1/T1-240 FS, because these boards have only 3 DSPs per trunk.)
Conferencing resources 
All channels
Max. boards/system   
 4 (QA tested by Dialogic); more than 4 are possible — depends on the application and the performance of 
the server hardware
CSP 
 
Yes
Form factor 
 
PCI: Full Size; PCIe: Half Size (1, 2, 4 trunks)/Full Size (4, 8 trunks)
Resource bus 
 
PCI: Rev 2.2 up to 66 MHz; PCIe Half Size 1.0a x1 lane (3.3/12 V); PCIe Full Size 1.0a x4 lane (3.3/12 V)
Connection 
 
PCI: 2 or 4 RJ-45 connectors; PCIe: 4 RJ-45 connectors
Network interface   
E1/T1/J1 and ISDN PRI (Primary Rate Interface) in TE and NT Mode
Signaling 
 
ETSI, NI-1, 4ESS, 5ESS, and all major ISDN protocols; QSIG; and many more
Operating system   
Windows
®
 and Linux. Details at 
www.dialogic.com/systemreleases
 
Volts 
 
3.3 and 5
Required accessories 
1, 2, 4, or 8 shielded RJ-45/RJ-45 cables; V-8PRI requires 4 RJ45 Y-Cables
Hardware
•  64-bit RISC CPU, 466 MHz, 1070 MIPS with 64 MB SDRAM
•  16/32-bit DSPs, 600 MHz, 1200 MIPS with 32 MB SDRAM per installed DSP
•  PCI: 10 DSPs (Diva V-2PRI) or 20 DSPs (Diva V-4PRI)
•  PCIe (Half Size): 12 DSPs (Diva V-1PRI, Diva V-2PRI, Diva V-4PRI)
•  PCIe (Full Size): 24 DSPs (Diva V-4PRI, Diva V-8PRI)
•  384, 448, 704, or 896 MB onboard SDRAM
•  Physical dimensions: 
  — PCI: 312.00 mm x 106.68 mm (PCB)
  — PCI: 352.17 mm x 126.37 mm (including bracket and retainer)
  — PCIe: 167.65 mm x 111.15 mm (PCB)
  — PCIe: 180.96 mm x 126.31 mm (including bracket and retainer)
  — PCIe: 352.17 mm x 126.31 mm (including bracket and retainer)
•  High-impedance mode for passive monitoring (“line tapping via HiZ mode”)
•  I/O addresses, memory, and interrupt allocated automatically
•  Plug-and-play interface
•   PCI 2.2, up to 66 MHz, 32 bit (also supports 64 bit dual address cycle DMA), 3.3 V and 5 V supply required, 3.3 V, or 5 V universal signaling, 
supported in backwards compatible PCI-X slots
•  Production quality: ISO 9002
Technical Specifications