Pelco C689M (5/01) Manual Do Utilizador
4
Pelco Manual C689M (5/01)
NOTE:
IP addresses and
subnet masks must be set
correctly. Do not make or
alter these settings if you do
not have sufficient expertise
on networks. The IP addres-
ses 192.168.1.xxx (1-254)
fall within the range of
private IP addresses
prescribed for RFC1918.
Please use this range if it
does not potentially cause
any problems to do so.
correctly. Do not make or
alter these settings if you do
not have sufficient expertise
on networks. The IP addres-
ses 192.168.1.xxx (1-254)
fall within the range of
private IP addresses
prescribed for RFC1918.
Please use this range if it
does not potentially cause
any problems to do so.
00797
NETWORK CONNECTION
To connect the computer to one or more DVRs, you must use a dedicated local area net-
work (LAN). A dedicated LAN consists of the computer and DVRs only.
work (LAN). A dedicated LAN consists of the computer and DVRs only.
The following setup procedure is for Windows 98. Details may vary slightly for Windows
2000 or Windows Me.
2000 or Windows Me.
1.
Go to Start\Settings\Control Panel\Network. Highlight TCP/IP in the Configuration
page, and then click the Properties button.
page, and then click the Properties button.
Figure 1. Configuration Page