Panasonic SRP2003/27 Manual Do Utilizador

6

EN

7

EN

5

   Switch ON the TV.   

Try out the buttons 

you need for 

operating it. Try, for 

example, if the - CH 

+ and digit buttons 

function properly.

•   If a button does not work as expected, press 

and hold that button. Release it immediately 

as soon as it works. For more information, 

see chapter 2.2.2.

6

   Press the 

  

device selection 

button twice to 

finish setup.

  •

 

When no 

button is 

pressed for 5 minutes or more, the 

remote control will exit setup mode, 

automatically saving all your settings. 

Important

If you made a mistake:

•   Press the device selection button twice to 

exit setup. The red Setup light   turns off.

•  Restart from the beginning.

•   If the device does not respond at all or not to 

2.2.1   Setting up the remote control for

other devices (DVD player/recorder 

and Cable/Satellite box)

1  

Make sure the device is switched on and 

operational. E.g. insert a disc in the DVD 

player / recorder or a video cassette in the 

VCR.

2

   Then follow steps 2 to 6 of ‘Setting up the 

remote control for your TV’. Make sure to 

use the correct device selection button: 

 

or 

. 

2.2.2  Improving buttons

When correctly set up, the remote control 

should be able to operate all your devices. 

However, when using the remote control for the 

first time it might occur that some buttons do 

not yet function as expected. 

In this case you can have the remote control 

search for alternatives.

Note

Improving buttons is not possible when the 

code was found during full database search 

(with code ‘9, 9, 9, 9’).

1  

Make sure the receiving device is able to 

respond. E.g. when you try to repair the Play 

button for your DVD player, make sure to 

insert a DVD into the DVD player otherwise 

the Play button is not able to function.

2

   Press the button that does not function, 

keep it pressed and immediately release it 

when the device responds. Repeat this for 

every button that does not function.

•   If the button still does not function as 

expected, try pressing it again for a longer 

period of time.

1  

Make sure the receiving device is able to 

respond. E.g. when you try to repair the Play 

button for your DVD player, make sure to 

insert a DVD into the DVD player otherwise 

the Play button is not able to function.

2

   Select the device 

that you wish to 

operate (e.g. DVD).

Press the 

 device 

selection button to 

select DVD.

3   Keep buttons    

and   pressed 

seconds.

  •   The red Setup 

light   lights 

up. The remote control is now in setup 

mode.

Getting

star

ted

2 x

English

5 sec.