Jasco RM84930 Manual Do Utilizador

10

Some GE, RCA and ProScan models require 
you to press the device button for more than one 
second to turn the device on and the ON•OFF 
button to turn the device off.

Some Combo devices (e.g. TV/VCR, TV/DVD, 
DVD/VCR, etc.) will require you to set up two 
different Mode buttons to control both parts of the 
Combo device. For example, if you have a TV/
DVD Combo, you might need to set up one code 
under the TV button to control the TV part AND a 
separate code (under any other Mode button) to 
control the DVD part.

 

This remote allows the 6 VCR transport buttons 
(i.e. PLAY, PAUSE, STOP, FF, REWIND, and 
REC) to Punch-Through control from any Mode 
programmed with TV, SAT or Cable codes to the 
last VCR, or DVD programmed Mode you used. 
This feature will not operate if the programmed 
TV, SAT or Cable code has its own VCR transport 
button control e.g. a TV Combo, SAT/PVR, etc.

Backlighting is activated when you press the 
Backlight button. Backlight illumination occurs 
for five seconds after the Backlight button has 
been pressed. Any further key-presses within five 
seconds will continue to reset the five second time-
out period. I.E., illumination always remains on for 
five seconds after the last keypress. Once timed 
out, the Backlighting will not reactivate until the 
Backlight button is pressed again.