Sony RM-TP503 Manual
26
GB
Operation
Macro Play setting
The following is an example of how to set the command
“POWER” for SONY VTR 1 in BOX 2 of MACRO 1. Set
other commands in a similar manner.
“POWER” for SONY VTR 1 in BOX 2 of MACRO 1. Set
other commands in a similar manner.
1
Touch SETUP.
The SETUP screen appears.
The SETUP screen appears.
2
Touch MACRO.
The setting screen for Macro Play appears.
The setting screen for Macro Play appears.
3
Select the MACRO Number.
Select MACRO 1, MACRO 2 or MACRO 3 in which
you want to register the macro program. For example,
select MACRO 1.
The BOX Number list appears.
Select MACRO 1, MACRO 2 or MACRO 3 in which
you want to register the macro program. For example,
select MACRO 1.
The BOX Number list appears.
2
Touch DOWNLOAD.
The DOWNLOAD screen appears.
The DOWNLOAD screen appears.
“TUNER PRESET NAME“ does not appear in the case of an
amplifier.
amplifier.
3
Touch to select the data you wish to download and
press:
FUNCTION NAME: Names of connected components.
TUNER PRESET NAME: Broadcast station names etc.,
press:
FUNCTION NAME: Names of connected components.
TUNER PRESET NAME: Broadcast station names etc.,
memorized in receiver. This is not displayed in case
of amplifier.
of amplifier.
CD MEMO: CD song titles or disc titles etc., from a
Sony CD changer (5/50/200/300 CD) connected to
the receiver/amplifier with CONTROL A1 cord.
the receiver/amplifier with CONTROL A1 cord.
Downloading starts, and the progress is displayed.
During this time, please leave the commander’s
transmitter/receiver section pointed toward the
display on the receiver/amplifier.
During this time, please leave the commander’s
transmitter/receiver section pointed toward the
display on the receiver/amplifier.
When downloading has finished, the DOWNLOAD
screen reappears. A long beep sound is emitted to
indicate that the downloading was successful.
If a series of short beeps is emitted, redo the
downloading procedure. If this occurs, make sure the
receiver/amplifier is turned on and that the
commander is pointing toward the receiver/amplifier
during operation.
screen reappears. A long beep sound is emitted to
indicate that the downloading was successful.
If a series of short beeps is emitted, redo the
downloading procedure. If this occurs, make sure the
receiver/amplifier is turned on and that the
commander is pointing toward the receiver/amplifier
during operation.
4
Repeat step 3 to download other data.
5
Touch EXIT.
Downloading finishes and the SETUP screen
reappears.
Downloading finishes and the SETUP screen
reappears.
When you touch CANCEL, the data downloaded
before you touched CANCEL will be saved.
before you touched CANCEL will be saved.
Adjusting the Commander’s Operating Environment