Sunwave Tech. SRC-3310/9320 Manual Do Utilizador

SRC-93 SERIES User’s Manual 

 

The AUTO mode‘s preprogrammed code circle depends 
on the range of Manufacture Code table reserved for that 
default device screen.  Ex. TV’s preprogrammed code 
circle will be from 0 ~255. 

Using the Learning Function 

If you have the original remote, the SRC-93 SERIES has the 
ability to directly learn infrared codes. 

Before Using the Learning Function 

Before you start using the SRC-93 SERIES's learning function, 

please heed the following precautions: 

•  Not all infrared codes are learnable by the SRC-93 SERIES. You 

may need to first collect the codes (see page 24 for more 
information) and then email them to SUNWAVE. New system 

software will then be sent to you allowing your SRC-93 SERIES to 

learn the codes.  

•  To change from a device that has already been programmed, 

delete all of the commands for the first device before teaching 
new ones. For example, to operate the living room TV instead 

of the bedroom TV, delete all commands for the bedroom TV 

first. Then re-configure the TV device screen for the living room 
TV.  

•  When using the learning function, you must press each button 

within 2 minutes of pressing the last button. Otherwise, the SRC-

93 SERIES will exit the learning mode and return to its normal 

operation mode.