Sunwave Tech. SRC-3310/9320 Manual Do Utilizador

SRC-93 SERIES User’s Manual 

 

Collecting Unrecognized Infrared Codes 

Use this procedure if the SRC-93 SERIES is unable to 
recognize the infrared signals from another remote 
control. (You only see the ERROR indicator when Using 
the Learning Function on page 20.) 
Once collected you can use the Remote Connector 
(see Appendix B - Accessories on page 44 for more info) 
to upload the unrecognized codes to your personal 
computer and then email them to SUNWAVE for 
analysis. SUNWAVE can then update the system 

software and send you an updated version that will 
recognize the codes. 
SUNWAVE service email address is: 

support@sun-wave.com

 

All unrecognized codes should be sent to this address.  

Every time when you enter the DBUG mode, the SRC-
93 SERIES will replace the previously stored 
unrecognized codes by new ones. If you have more 
than one remote that is not programmable, please 
upload the first remote’s unrecognized codes and then 
gather the second remote’s.  

Press and hold the SETUP button on 
the Touch Screen. 
Press each number button (2, 4, 6, 
8) until it disappears. 
Use the arrow buttons on the 
Touch Screen to select DBUG  and 

then press the OK button. 

 

The rest of the collection procedure is the same as Using 

the Learning Function on page 20. When finished press the 
EXIT button.