Philips LX3700D Manual Do Utilizador

The 

AD905W accessory gives you the option for wireless

speaker connection.
Please check you have all the supplied parts for your
AD905W wireless set:

– 1 x 

– 1 x 

– 1 x 14V adapter
– 1 x table stand

Remove the PHILIPS cover from the 

AD905WA 

 as shown in 

Fig. 1, to access the connection

terminal. Connect your rear speaker terminals with the
corresponding color terminals on the 

Insert the table stand into the brackets as shown in 

Fig.2.

Connect the 

AD905WA 

 power cord

to your power supply.

Check / adjust the 

AD905WA 

 

ON switch to the ON position (see Fig.1).
➜ The AD905WA 

 power indicator

lights up green.

Connect the 14V power adapter to the 

 and power supply as shown in 

3.

Make sure you position both the 

 and 

 at least

2 meters apart.

Connect and carefully match the 

 inputs to the corresponding surround

speaker jacks on your 

LX3750W DVD system.

➜ The AD905WT 

 power

indicator lights up red.

Check and adjust the 4-channel toggle switch on the
AD905WT 

 and 

 (

CHANNEL SELECTOR switch),

so that both units are using the same channel.

On your 

LX3750W DVD system, play an audio source

and activate the surround sound mode option. Adjust the
volume to reproduce surround sound in the rear speakers.

10 Extend the antenna vertically on both the AD905WT

 and 

 to improve reception. Check the antennas are

safely positioned without obstruction.

1

2

3

● Place both the AD905WT 

 and

 off the ground

(recommended minimum height of 30cm).

● Avoid placing the AD905WT 

 too

close to your DVD receiver, AC power adapter, TV or other
electrical equipment as it may cause electrical interference.

● In case of sound distortion, please select another channel

for both the 

 and

. The distortion could

be the result of interference caused by other equipment
using same frequency channel in your house or
neighbourhood.