RCA HDLP50 Manual Do Utilizador

Página de 80
Connections & Setup
Chapter 1
 Things to Consider Before You Connect 
Protect Against  Power Surges
• 
Connect all components before you plug any of their power cords into the wall outlet or power strip. 
NEVER plug your TV into an outlet that is controlled by a wall switch.
• 
Turn off the TV and/or device(s) before you connect or disconnect any cables.
• 
Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions 
sheet packed with your TV.
Protect Components from  Overheating
• 
Don’t block ventilation holes on any of the components. Arrange the components so that air can 
circulate freely.
• 
Don’t stack components.
• 
If you place components in a stand, make sure you allow adequate ventilation.
• 
If you connect an audio receiver or amplifi er, place it on the top shelf so the heated air from it won’t fl ow 
around other components.
Position Cables Properly to Avoid Audio Interference
Insert each cable fi rmly into the designated jack.
Use  Indirect Light
Don’t place the TV where sunlight or room lighting will be directed toward the screen. Use soft or indirect 
lighting.
FCC Statement 
This digital television is capable of receiving analog basic, digital basic and digital premium cable television 
programming by direct connection to a cable system providing such programming. A security card provided 
by your cable operator is required to view encrypted digital programming. Certain advanced and interactive 
digital cable services such as video-on-demand, a cable operator’s enhanced program guide and data-enhanced 
television services may require the use of a set-top box. For more information, call your local cable operator.