RCA HDLP50 Manual Do Utilizador

Connect an NTSC (analog) device. These 

jacks are used for most audio/video connections between devices. The audio/video jacks 
are often color coded (yellow for video, red for right audio, and white for left audio).

• 

 provides right audio connection and connector is usually red.

• 

 provides left audio connection and connector is usually white.

•  V (Video) provides composite video connection and connector is usually yellow.

• 

  Lets you connect an S-Video cable for better picture quality to a device 

with S-Video capability, such as a VCR or DVD player. When using S-Video, make 
sure to connect the two audio cables as well as the 
S-Video connector. 

 

The S-Video jack provides better picture quality than the composite video jacks 
because the color (chrominance, also called chroma) part of the signal is separated 
from the black and white (luminance) part of the picture. 

  Provides connection to an additional optional video 

device, such as a DVD player or satellite receiver. The jacks are the same as described 
above for INPUT 2.

• 

  Provides right front and right rear mixed sound to the right input, and left 

front and left rear mixed sound to the left input.

• 

  Connect your device with a VGA, SVGA, or XGA output, to 

this jack using a 15 pin D-sub cable.

• 

  Use to obtain sound when a device is connected to 

the SVGA jack. Use a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8” 
stereo mini pin) to connect a device to your TV.

   (some TV models only have one HDMI Input) High-

Defi nition Multimedia Interface/Digital Visual Interface  Provides an uncompressed 
digital interface that carries both video and audio data by way of an integrated mini-plug 
cable. Since HDMI is based on Digital Visual Interface (DVI), the jack on the back of 
your TV is also compatible with DVI devices.

Note: If you connect a device with a DVI jack to one of the HDMI inputs, you’ll 
need an HDMI to DVI adapter. Also, connect audio cables to an input that is not 
in use. An example is shown on page 16. Then go to the Advanced Audio menu and 
select DVI Audio Input to choose the input you’re using to receive audio.