RCA HDLP50 Manual Do Utilizador

Chapter 4

Using the TV’s Menu System

SAP (Second Audio Program) When turned on and available, Second Audio Program

plays the analog program’s audio in a second language. SAP is also used to broadcast
a program’s audio with descriptions of the video for the visually impaired. SAP might
also contain audio which is totally unrelated to the video.

Note: SAP is broadcast in mono and is only available for analog programs, not digital
programs.

You can activate SAP (if available) temporarily with the SOUND button (on Remote
R602A1 Only). Changing channels or inputs reverts SAP back to the SAP menu
setting.

Startup

Volume Select the volume level that you want when the TV is turned on,

then press the OK button to activate the option. To deactivate Startup Volume, access
the menu and press OK.

Maximum

Volume This feature is intended to stop the volume from being turned

up too loudly. Set the volume at the loudest level you would want to hear. To hear
how loud you’re setting the volume, press and hold the OK button.

Note: Startup and Maximum Volumes apply if Fixed/Variable Out is set to Variable
Level, Speakers On.

Fixed/Variable Out Displays a choice list that lets you turn the TV’s front internal
speakers on or off and set the Fixed/Variable audio output to a fi xed or variable
volume output level. The choices are:

• Variable Level, Speakers On Turns the TV’s front speakers On and allows

variable output from the TV’s FIXED/VARIABLE AUDIO OUTPUT jacks.
Use this setting if the TV is not connected to an audio receiver or amplifi er and
the volume is controlled by the TV.

• Variable Level, Speakers Off Turns the TV’s front speakers Off and allows

variable output from the TV’s FIXED/VARIABLE AUDIO OUTPUT jacks.
Use this setting if the TV is connected to an audio receiver or amplifi er and the
volume is controlled by the TV.

• Fixed Level, Speakers Off Turns the TV’s front speakers Off and provides

fi xed output from the TV’s FIXED/VARIABLE AUDIO OUTPUT jack to a
receiver or amplifi er. With the Fixed Output, the TV’s volume control, graphic
equalizer, and mute are disabled. This output is ideal when connecting to an
audio receiver or amplifi er that has its own remote control for controlling the
volume.

Digital Audio Out Allows you to receive Dolby Digital surround sound if
transmitted and you’ve connected a six-channel receiver to the TV’s DIGITAL
AUDIO OUTPUT jack with a digital optical cable. Choose the correct setting in the
Digital Audio Out menu:

• Auto Select Your TV automatically chooses between Dolby Digital and PCM

based on the audio signal it is receiving. This is the best selection if you have a
decoder with Dolby Digital and PCM that was manufactured in the last several
years.

• PCM (Pulse Code Modulation) The TV sends all signals through the Digital

Audio Output in PCM.

Fixed/Variable Out

Go Back

SAP

Main Menu

Advanced Audio

Press

5 or 6 to point to an option, then press OK to

select it. Press

3to return to the menu.

Use Variable Output if volume will be controlled by the TV.
Use Fixed Output when connecting to an audio receiver or
amplifier with its own remote control for controlling volume.

Select the default for the Fixed/Variable Output:

Variable Output, Speakers On

Variable Output, Speakers Off

Fixed Output, Speakers Off

Audio Lang./Mode

Sound Expansion

Startup Volume

Digital Audio Out

Maximum Volume

DVI Audio Input