Philips VR270W/07 Manual Do Utilizador
27
Programming a recording with
'TURBO TIMER'
'TURBO TIMER'
With this function, programming a recording that takes place within the next 24 hours, will be
quick and easy. The following pre-set information will appear in the display when you programme
a recording using 'TURBO TIMER'.
Programme number = the programme number currently selected (TV channel)
Start time = current time
End time = current time +2 hours
quick and easy. The following pre-set information will appear in the display when you programme
a recording using 'TURBO TIMER'.
Programme number = the programme number currently selected (TV channel)
Start time = current time
End time = current time +2 hours
01
1
Press TURBO TIMER on the remote control.
The current set programme number will appear in the display, for
instance, 'PROG.
The current set programme number will appear in the display, for
instance, 'PROG.
01'. If required, you can change this using P ;q or
P =r .
a'CLK' will flash in the video recorder display
b This display means that the video recorder clock is not set correctly. Please
read the section 'Setting the time and date' in chapter 'Installing your video
recorder'
recorder'
20:00
2
Press TURBO TIMER .
The current time (= start time) will appear in the display, for instance,
'START
The current time (= start time) will appear in the display, for instance,
'START
20:00'. If required, you can change this using P ;q or
P =r .
22:00
3
Press TURBO TIMER .
The end time will appear in the display, for instance, 'END
The end time will appear in the display, for instance, 'END
22:00'.
'END
22:00'. If required, you can change this using P ;q or P =r .
4
Press TURBO TIMER .
'
'
OK' will briefly appear in the video recorder display. Programming is
now complete.
5
Insert a cassette with an intact security tab (unprotected).
6
Switch off with STANDBY/ON m .
The programmed recording will only function when the video
recorder is switched off with STANDBY/ON m .
If any of the TIMER blocks are in use, ' k ' will light up on the video
recorder display.
The programmed recording will only function when the video
recorder is switched off with STANDBY/ON m .
If any of the TIMER blocks are in use, ' k ' will light up on the video
recorder display.
ENGLISH
Programming a recording (TIMER)