Radio Shack 64 Manual Do Utilizador
18
3. Repeatedly press
until the desired lan-
guage appears next to the fifth item.
4. When you finish, press
MENU/ACTION
.
Resetting the VCR’s Memory
You can erase all settings (including the time
and date, local channels, and programmed
events) at any time. Eject any loaded tape,
then hold down
and date, local channels, and programmed
events) at any time. Eject any loaded tape,
then hold down
PLAY
and
CHANNEL s
on the
VCR for about 5 seconds until it turns itself off.
All settings are cleared.
All settings are cleared.
The next time you turn on the VCR, it performs
its initial setup sequence. See “Setting the On-
Screen Language/Channels/Clock” on Page
14.
its initial setup sequence. See “Setting the On-
Screen Language/Channels/Clock” on Page
14.
TURNING THE ERROR BEEP
ON/OFF
ON/OFF
Your VCR is preset to sound a beep through
your TV when you enter invalid or incomplete
information. However, you can turn the beep
off or on at any time.
your TV when you enter invalid or incomplete
information. However, you can turn the beep
off or on at any time.
Follow these steps to turn off the beep.
1. Press
MENU/ACTION
to display the main
menu.
2. If necessary, repeatedly press
or
to
highlight
SET
UP
VCR
, then press
.
3. Repeatedly press
or
to highlight
BEEPER
. Then press
to select
OFF
.
4. Press
MENU/ACTION
twice to exit.
To turn on the beep again, repeat these steps
and select
and select
ON
in Step 3.
: ON
: ON
ACK : ON
Y
KEY
VCR
- - - - - -
USING THE VCR REMOTE
CONTROL WITH YOUR TV AND
CABLE BOX OR SATELLITE
RECEIVER
CONTROL WITH YOUR TV AND
CABLE BOX OR SATELLITE
RECEIVER
In addition to controlling your VCR, the remote
control can operate the basic functions of your
TV and cable box or direct-to-home satellite re-
ceiver. Follow these steps to program the re-
mote control with the correct manufacturer’s
code number for that TV, cable box, and direct-
to-home satellite receiver.
control can operate the basic functions of your
TV and cable box or direct-to-home satellite re-
ceiver. Follow these steps to program the re-
mote control with the correct manufacturer’s
code number for that TV, cable box, and direct-
to-home satellite receiver.
Note: Some brands have more than one code
listed in the charts. If a code does not work with
your TV, cable box, or direct-to-home satellite
receiver, try another. The listed codes might
not work with all models from the listed manu-
facturers.
listed in the charts. If a code does not work with
your TV, cable box, or direct-to-home satellite
receiver, try another. The listed codes might
not work with all models from the listed manu-
facturers.
1. Find the code for your TV and cable box or
direct-to-home satellite receiver in the fol-
lowing charts.
lowing charts.
TV BRAND
CODE
Fisher
10
GE
03
Goldstar
15, 16, 17
Hitachi
12
JVC
11
Magnavox
05
Mitsubishi
07, 13
Panasonic
01, 02
Quasar
01, 02
RadioShack
01, 02, 15, 16, 17
RCA
03
Realistic
01, 02, 15, 16, 17
Samsung
14
Sanyo
10
Sharp
06, 07
Sony
08
Sylvania
05
Toshiba
09
Zenith
04
16-634.fm Page 18 Tuesday, July 20, 1999 5:37 PM