Toshiba RD-XV48KE Manual Do Utilizador

36

EN

• If there is a power failure or the unit is unplugged for 

more than 30 seconds, the clock setting and all 
timer settings will be lost.

• If a disc is not inserted or if an inserted disc is not 

recordable (finalised DVD-RW/-R, finalised DVD+R, 
a fully recorded disc, etc.), the unit will perform the 
alternate recording to the HDD. (See page 34.)

• When a timer recording is completed, the unit will 

ask you whether to turn off the unit if there is no 
timer recording which starts within 4 minutes, except 
under conditions listed below.

- During playback of HDD or DVD.
- While displaying menus or information on the 

screen.

• The unit will be turned off automatically if you select 

“Yes” or if you do not reply in 1 minute.

• When the programmed starting and ending time are 

earlier than the current time, the setting will not be 
accepted.

• Timer recording whose recording time exceeds 12 

hours cannot be made.

• It is prohibited to turn off the unit from 4 minutes 

before the programmed starting time.

• It is prohibited to change channel from 15 seconds 

before the programmed starting time.

• [REC I] does not work from 2 minutes before the 

programmed starting time. If it comes to 2 minutes 
before the starting time during regular or one-touch 
timer recording, the recording in progress will be 
stopped.

• Playback of DVD/CD is prohibited from 2 minutes 

before the programmed starting time when the 
recording media is DVD. If it comes to 2 minutes 
before the programmed starting time during DVD/
CD playback, the playback will be stopped.

• When 2 or more programmes are overlapped, 

“Timer programme overlapped” appears, and the 
overlapped programme will be displayed in blue. To 
correct the timer programme refer to “Checking, Cancelling or Correcting the Timer Programming Information” on page 34.

• If the Start time is earlier and the End time is later 

than the current time, the recording will start 
immediately after you press [ENTER] at step 

 on 

page 34.

Priority of overlapped settings
The unit records programmes according to priority if 
the timer programmes overlap.

If the starting time is same:
• The timer programming set first (PROG. 1) has 

priority.

When the starting time and the ending time for 
each programmes are different:
• A programme that has earlier start time has priority.

If the recording time is partially overlapped:
• The timer programming with the earlier start time 

(PROG. 2) has priority. PROG. 1 will start after 
PROG. 2 recording is complete.

If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not 

recorded.

Note for DVD recording
• If the recording time of two programmes are 

overlapped, or the End time of a programme and the 
Start time of another is same, the first 2 minutes (at 
the longest) of the subsequent programme will be 
cut off.

If the End time of the programme currently being 
recorded and the Start time of the subsequent 
programme are same:
• The beginning of the PROG. 2 may be cut off.

* If the cut off time exceeds 3 minutes, the error 

number “E40” will appear in “Timer Programming” 
list.

PROG. 2 
recording 
will start 
after 
PROG. 1 
recording 
is 
completed.

The first 2 minutes (at the longest) will be cut off.

The first 2 minutes (at the longest) will be cut off.

The first 2 minutes (at the longest) will be cut off.

The first 2 minutes (at the 
longest) will be cut off.*

E3LG0ED_EN.book  Page 36  Wednesday, April 30, 2008  11:52 AM