ONKYO PR-SC886 Manual Do Utilizador

126

You can program the remote controller’s MACRO but-
tons to perform a sequence of remote control actions.

Example:
To play a CD you typically need to perform the follow-
ing actions:

1. Press the [RECEIVER] REMOTE MODE button 

to select the Receiver remote controller mode.

2. Press the [ON] button to turn on the AV controller.
3. Press the [CD] INPUT SELECTOR button to 

select the CD input source.

4. Press the [CD] REMOTE MODE button to select 

the CD remote controller mode.

5. Press the Play [

1] button to start playback on 

the CD player.

You can program a MACRO button so that all five 
actions are performed with just one button press.

Each MACRO button can store one macro, and each 
macro can contain up to eight commands.

Note:
If any of the buttons you used to make a macro are taught 
new commands, the macro will no longer work properly 
and will have to be made again.

While holding down the REMOTE 
MODE button of the remote con-
troller mode you want to use at 
the start of the macro, press 
MACRO button [1], [2], or [3].
The Remote indicator lights up.

For the CD example in the left column, 
you’d press and hold the [RECEIVER] 
REMOTE MODE button, and then 
press MACRO button [1], [2], or [3].

Press the buttons whose actions 
you want to program into the 
macro in the order you want them 
performed.
For the CD example in the left column, 
you’d press the following buttons: 
[ON], [CD] INPUT SELECTOR, [CD] 
REMOTE MODE, Play [

1].

When you’ve finished, press the 
MACRO button again.
The Remote indicator flashes twice.
If you enter eight commands, the pro-
cess will finish automatically.

Press the MACRO [1], [2], or [3] 
button.
The commands in the macro are trans-
mitted in the order in which they were 
programmed. Keep the remote control-
ler pointed at the AV controller until all 
of the commands have been transmit-
ted.
Macros can be run at any time, regard-
less of the current remote controller 
mode.