ONKYO PR-SC886 Manual Do Utilizador

28

• Before making any AV connections, read the manuals 

supplied with your other AV components.

• Don’t connect the power cord until you’ve completed 

and double-checked all AV connections.

The AV controller’s optical digital jacks have shutter-
type covers that open when an optical plug is inserted 
and close when it’s removed. Push plugs in all the way.

Caution: To prevent shutter damage, hold the optical 
plug straight when inserting and removing.

RCA-type AV connections are usually color coded: red, 
white, and yellow. Use red plugs to connect right-
channel audio inputs and outputs (typically labeled “R”). 
Use white plugs to connect left-channel audio inputs and 
outputs (typically labeled “L”). And use yellow plugs to 
connect composite video inputs and outputs.

• Push plugs in all the way to make 

good connections (loose connec-
tions can cause noise or malfunc-
tions).

• To prevent interference, keep 

audio and video cables away from 
power cords and speaker cables.

Note: The AV controller does not support SCART connections.

Left (white)

Right (red)

(Yellow)

Left (white)

Right (red)

(Yellow)

Right!

Wrong!

HDMI connections can carry uncompressed stan-
dard- or high-definition digital video and audio and 
offer the best picture and sound quality.

Component video separates the luminance (Y) and 
color difference signals (P

R

, P

B

), providing the best 

picture quality. (Some TV manufacturers label their 
component video jacks slightly differently.)

S-Video separates the luminance and color signals 
and provides better picture quality than composite 
video.

Composite video is commonly used on TVs, VCRs, 
and other video equipment.

This offers the best sound quality and allows you to 
enjoy Dolby Digital and DTS. The audio quality is 
the same as for coaxial.

This offers the best sound quality and allows you to 
enjoy Dolby Digital and DTS. The audio quality is 
the same as for optical.

This cable carries analog audio. Balanced XLR 
cables are used for better noise immunity and longer 
cable runs.

This cable carries analog audio. It’s the most 
common connection format for analog audio and 
can be found on virtually all AV components. 

This cable carries multichannel analog audio and is 
typically used to connect DVD players with a 7.1-
channel analog audio output. Several standard 
analog audio cables can be used instead of a multi-
channel cable.