ONKYO PR-SC886 Manual Do Utilizador
52
Component Video Setup
If you connect a video component to a COMPONENT
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 3, you must assign COM-
PONENT VIDEO IN 3 to the DVD input selector.
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 3, you must assign COM-
PONENT VIDEO IN 3 to the DVD input selector.
By default, the DVD input selector is assigned to COM-
PONENT VIDEO IN 1, and all of the other input selec-
tors are assigned to the “- - -” option.
PONENT VIDEO IN 1, and all of the other input selec-
tors are assigned to the “- - -” option.
If you’ve connected your TV to the AV controller with a
component video cable, you can set the AV controller so
that composite video and S-Video sources are upcon-
verted* and output by the COMPONENT VIDEO MON-
ITOR OUT 1 or 2. You can set this for each input
selector by selecting the “- - -” option.
component video cable, you can set the AV controller so
that composite video and S-Video sources are upcon-
verted* and output by the COMPONENT VIDEO MON-
ITOR OUT 1 or 2. You can set this for each input
selector by selecting the “- - -” option.
Notes:
• For composite video and S-Video upconversion for
• For composite video and S-Video upconversion for
the COMPONENT VIDEO MONITOR OUT 1 or 2,
the “Monitor Out” setting must be set to “Analog”
(see page 49), and the “Component Video Input” set-
ting must be set to “- - -”. See page 30 for more infor-
mation on video signal flow and upconversion.
the “Monitor Out” setting must be set to “Analog”
(see page 49), and the “Component Video Input” set-
ting must be set to “- - -”. See page 30 for more infor-
mation on video signal flow and upconversion.
• This procedure can also be performed on the AV con-
troller by using its [SETUP] button, arrow buttons,
and [ENTER] button.
and [ENTER] button.
Input selector
Default assignment
DVD
IN1
VCR/DVR
- - -
CBL/SAT
- - -
GAME/TV
- - -
AUX1
- - -
AUX2
- - -
TAPE
- - -
TUNER
- - - (Fixed)
CD
- - -
PHONO
- - -
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
sure the appropriate external input is
selected on your TV.
IN
OUT
Composite video, S-Video
Composite video, S-Video
Component video
Component video
2
Use the Up and Down [
q]/[w] but-
tons to select “1. Input/Output
Assign”, and then press
[ENTER].
The “Input/Output Assign” menu
appears.
Assign”, and then press
[ENTER].
The “Input/Output Assign” menu
appears.
3
Use the Up and Down [
q]/[w] but-
tons to select “3. Component
Video Input”, and then press
[ENTER].
The “Component Video Input” menu
appears.
Video Input”, and then press
[ENTER].
The “Component Video Input” menu
appears.
4
Use the Up and Down [
q]/[w] but-
tons to select an input selector,
and use the Left and Right
[
and use the Left and Right
[
e]/[r] buttons to select:
IN1: Use the video component
connected to COMPONENT
VIDEO IN 1.
VIDEO IN 1.
IN2: Use the video component
connected to COMPONENT
VIDEO IN 2.
VIDEO IN 2.
IN3: Use the video component
connected to COMPONENT
VIDEO IN 3.
VIDEO IN 3.
- - -: Output composite video and
S-Video sources from the
COMPONENT VIDEO
MONITOR OUT.
COMPONENT VIDEO
MONITOR OUT.
5
Press the [SETUP] button.
Setup closes.
Setup closes.
1. Input/Output
Assign
1. Monitor
Out
2. HDMI
Input
3. Component
Video
Input
4. Digital Audio Input
5. Analog Audio Input
5. Analog Audio Input
1–3. Component
Video
Input
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX1
AUX2
VCR/DVR
CBL/SAT
GAME/TV
AUX1
AUX2
IN1
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
MOVE
VALUE
RETURN
RETURN
EXIT
SETUP