ONKYO PR-SC886 Manual Do Utilizador

89

This section explains items on the “Speaker Setup” 
menu.

Some of the speaker settings are set automatically by the 
Automatic Speaker Setup function (see page 58).

With the Speaker Configuration settings, you can specify 
which speakers are connected and a crossover frequency, 
distance, and level for each speaker. 

The following crossover frequencies can be specified: 
Full Band, 40 Hz, 45 Hz, 50 Hz, 55 Hz, 60 Hz, 70 Hz, 
80 Hz (THX), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 130 Hz, 
150 Hz, or 200 Hz.

Specify Full Band for speakers that can output low-fre-
quency bass sounds adequately, for example, speakers 
with a good sized woofer. For smaller speakers, specify 
a crossover frequency. Sounds below the crossover fre-
quency will then be output by the subwoofer instead of 
the speaker. Refer to your speakers’ manuals to deter-
mine the optimum crossover frequencies.

If you’re using THX-certified speakers, specify 
80 Hz (THX) for all speakers.

These settings are set automatically by the Automatic 
Speaker Setup function (see page 58).

Press the [SETUP] button.
The main menu appears onscreen.

q]/[w] but-

tons to select “2. Speaker 
Setup”, and then press [ENTER].
The “Speaker Setup” menu appears.

q]/[w] but-

tons to select “2. Speaker Con-
fig”, and then press [ENTER].
The “Speaker Config” screen appears.