Sony HDW-M2100 Manual Do Utilizador
Chapter 9
Setup Menus
Chapter 9 Setup Menus
9-27
Menu items in the range 900 to 999, relating to digital processing (Continued)
Item number
Item name
Settings
942
V FILTER SELECT
(Invalid in 24PsF or
23.98PsF mode.)
(Invalid in 24PsF or
23.98PsF mode.)
Set the vertical interpolation filter coefficient for HD-SD converter output.
The vertical resolution increases as the setting grows larger.
The vertical resolution increases as the setting grows larger.
1 to 3
943
CROSS COLOR CRISP
(Invalid in 24PsF or
23.98PsF mode.)
(Invalid in 24PsF or
23.98PsF mode.)
Set the cross color crisp level for HD-SD converter output.
0x00 to 0x04 to 0x0f
0x00 to 0x04 to 0x0f
950
UP CONVERTER MODE
(Invalid in 24PsF or
23.98PsF mode.)
(Invalid in 24PsF or
23.98PsF mode.)
Select the up-converter mode.
crop : Select the edge-crop mode.
l-box: Select the letter box mode.
squez: Select the squeeze mode.
squez: Select the squeeze mode.
951
H CROP POSITION (UC)
(Invalid in 24PsF or
23.98PsF mode.)
(Invalid in 24PsF or
23.98PsF mode.)
Adjust the “H-crop” (the horizontal position when inserting in the edge crop mode)
of the up/down converter output when menu item 950 is set to crop.
–120 to 0 to 120
of the up/down converter output when menu item 950 is set to crop.
–120 to 0 to 120
952
LETTER BOX POSITION
(Invalid in 24PsF or
23.98PsF mode.)
(Invalid in 24PsF or
23.98PsF mode.)
Adjust the vertical position of the letter box mode cutout in up-converter output
when l-box is selected in menu item 950.
–120 to 0 to 120
when l-box is selected in menu item 950.
–120 to 0 to 120
953
UP CONVERTER
PROCESS SELECT
(Invalid in 24PsF or
23.98PsF mode.)
PROCESS SELECT
(Invalid in 24PsF or
23.98PsF mode.)
Select the original picture to use when converting SD to HD.
FIELD: Use field picture.
FRAME: Use frame picture.
FIELD: Use field picture.
FRAME: Use frame picture.
adapt (standard mode): Set the ratio of converting from frames or fields to the
standard ratio when up-converting.
adap2 (still picture priority mode): Set the ratio of converting from frames
higher when up-converting.
adap3 (motion priority mode): Set the ratio of converting from fields higher
when up-converting.
954
DETAIL GAIN (UC)
(Invalid in 24PsF or
23.98PsF mode.)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Adjust the sharpness of
edge emphasis.
0 to 40H to 7FH
edge emphasis.
0 to 40H to 7FH
955
LIMITER (UC)
(Invalid in 24PsF or
23.98PsF mode.)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment.
Adjust the maximum detail level added to emphasize the original signal.
0 to 20H to 3FH
Adjust the maximum detail level added to emphasize the original signal.
0 to 20H to 3FH
956
CRISP THRESHOLD (UC)
(Invalid in 24PsF or
23.98PsF mode.)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Set the threshold
amplitude at which low amplitude signals are not emphasized.
0 to 8H to FH
amplitude at which low amplitude signals are not emphasized.
0 to 8H to FH
957
LEVEL DEPEND
THRESHOLD (UC)
(Invalid in 24PsF or
23.98PsF mode.)
THRESHOLD (UC)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Set the luminance range
for edge enhancement.
0 to 8 to FH
for edge enhancement.
0 to 8 to FH
958
H DETAIL FREQUENCY
(UC)
(Invalid in 24PsF or
23.98PsF mode.)
(UC)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Set the central frequency
and frequency characteristic for edge enhancement.
and frequency characteristic for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz : 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
959
H/V RATIO (UC)
(Invalid in 24PsF or
23.98PsF mode.)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Set the horizontal/vertical
ratio for edge enhancement.
0 to 3 to 7
ratio for edge enhancement.
0 to 3 to 7
960
GAMMA LEVEL (UC)
(Invalid in 24PsF or
23.98PsF mode.)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Adjust the slope of the
correction curve.
0 to 80H to 100H
correction curve.
0 to 80H to 100H
(Continued)