Alpine CDE-114BTI Manual Do Utilizador

-EN

Note

• You may need to increase volume from your regular audio listening

source level. However, increasing the volume excessively may result in
feedback. If feedback is noticed as feedback is directly related to the
volume, turn down the volume as low as acceptable to eliminate it.
Positioning the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce feedback at high
volume.

Call Switching Operation

While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.

While calling, press and hold

ENT for at least

2 seconds to switch the call sound between the unit and
mobile phone.

Note

• Depending on the mobile phone, this operation may not be performed.

* The illustrator is for CDE-114BTi.

Playing MP3/WMA/AAC Files with the USB
Memory (optional)

If you connect a USB Memory containing MP3/WMA/AAC, you can
play these files on this unit.
The following table shows which files in the USB Memory can be played.

Press SOURCE

 to switch to the USB AUDIO mode.

To pause playback, press

ENT.

Pressing

ENT again will resume the playback.

Notes

• The root folder is displayed as “ROOT” in the Folder Name Search

mode.

• When a search is made in the USB mode, any song being played back

will be stopped.

• This unit plays back files in the USB Memory with the same controls

and modes as playback of CDs containing MP3/WMA/AAC. For
details, refer to “CD/MP3/WMA/AAC” on page 10.

• Before disconnecting USB Memory, be sure to change to another source

or set to pause.

• The playback time may not be correctly displayed when a VBR

(Variable Bit Rate) recorded file is played back.

USB Memory Connection (optional)

Open the cover of the USB Connection Terminal.

USB Memory (optional)

MP3

WMA

AAC

CDE-111R



CDE-111RM



CDE-112Ri



CDE-113BT



CDE-114BTi



Connect USB Memory

SOURCE/



/ENT