Symphonic SF225B Manual Do Utilizador

VCR/TV button–

Press to select TV or VCR mode.

VCR position: to view playback, to monitor video
recordings or watch TV using the VCR tuner.
TV position: to watch TV or to view one program
while recording another.

Remote sensor window–

Receives the infrared

signals from the remote control.

10.

Indicators
PWR. (power) indicator–

Indicates when the VCR

is turned on.

VCR indicator–

Indicates when the VCR is in the

VCR position.

TAPE IN indicator–

Indicates when there is a tape

in the VCR.

TIMER indicator–

Indicates when the timer record-

ing or OTR has been set.

REC indicator–

Indicates during recording. Flashes

when a recording is paused.

CLOCK indicator–

Displays current time. PM indi-

cator lits when p.m.

11.

TAPE SPEED button–

Press to choose the desired

recording speed : SP/SLP.

12.

CHANNEL Up or Down buttons–

Press to select

the desired channels for viewing or recording.

Tracking function–

Press to minimize video ‘noise’

(lines or dots on screen) during playback (only on the
VCR).
Press to stabilize the picture in the Still mode when
the picture begins to vibrate vertically.

13.

RECORD button–

Press for manual recording.

OTR button–

Press to activate One Touch Record-

ing. (only on the VCR)

14.

MENU button–

Press to display the menu on the TV

screen. Press to exit the menu on the TV screen.

15.

NUMBER buttons–

Press to select desired channels

for viewing or recording. To select channels from 1
to 9, first press "0" button then 1 to 9. (only on the
remote control)

+100 button–

When selecting cable channels which

are higher than 99, press this button first, then press
the last two digits. (To select channel 125, first press
"+100" button then press "2" and "5"). (only on the
remote control)

16.

DISPLAY button–

Press to display the current time,

channel number, real time tape counter, and other in-
formation on the TV screen. (only on the remote con-
trol)

Each time you press this button, TV screen will
change as shown. The status display (STOP, PLAY
etc.) and the tape speed display (SP, LP (playback
only), or SLP) will disappear after 5 seconds.

17.

COUNTER MEMORY button–

Press to set counter

memory on and off. (only on the remote control)

18.

COUNTER RESET button–

Press to reset counter

to 0:00:00. (only on the remote control)

EXIT button–

Press to exit the menu on the TV

screen. (only on the remote control)

19.

AUTO REPEAT button–

Press to repeat playback

automatically. (only on the remote control)

20.

Power cord–

Connect to a standard AC outlet

(120V/60Hz).

21.

AUDIO OUT jack–

Connect to the audio input jack

of your audio equipment or another VCR.

22.

AUDIO IN jack–

Connect to the audio output jack of

your audio equipment or another VCR.

23.

ANT. IN terminal–

Connect to an antenna, Cable

system or Satellite system.

24.

VIDEO OUT jack–

Connect to the video input jack

of your video camera or another VCR.

25.

VIDEO IN jack–

Connect to the video output jack of

your video camera or another VCR.

26.

CH3/CH4 selector switch–

Use to select a video

output channel (3 or 4) for VCR playback.

27.

ANT. OUT terminal–

Connects to the antenna input

terminal on your TV.

INSTALLING THE BATTERY

Make sure the polarity of battery to install to the remote
control unit.

STOP

0:12:34

STOP

5:40PM

CH 02

<COUNT mode>

<CLOCK mode>

Press

once

<OFF mode>

Press

once

Press once

Install 2 X AA battery

PWR. (power) indicator
Indicador de alimentación

TAPE IN indicator
Indicador de videocasete
introducido

VCR indicator
Indicador de videograbadora

REC (record) indicator
Indicador de grabación (REC)

TIMER indicato
Indicador del temporizador

PM indicator
Indicador del tarde (PM)

CLOCK indicator / Indicador del reloj



INDICATORS



0J11

H7740

- 5 -