JVC HR-S5965EK Manual Do Utilizador
advanced features
37
Editing
L-1 OUTPUT Setting
The
L-1 IN/OUT
connector delivers either a composite signal (regular video
signal) or a Y/C signal (a signal in which the luminance and chrominance signals
are separated). Set
are separated). Set
L-1 OUTPUT
to the appropriate mode depending on the type of
unit connected to the rear panel
L-1 IN/OUT
connector of this VCR.
get to the output/input set screen
Press
. Move the highlight bar to
OUTPUT/INPUT SET
using the
PR
and
PR
buttons and press
(or E).
select mode
Move the highlight bar to
L-1
OUTPUT
using the
PR
and
PR
buttons. Press
(or E) to select the desired mode:
FOR L-1 OUTPUT
•
VIDEO
: If a connected device’s input is
compatible only with regular
video signals, set to
video signals, set to
VIDEO
.
•
S-VIDEO
: If a connected device’s input is
compatible with Y/C signals, set to
S-VIDEO
. This setting will let you take advantage of higher-quality
S-VHS pictures. (For connection, be sure to use a 21-pin SCART
cable that is compatible with the Y/C signal.)
cable that is compatible with the Y/C signal.)
return to normal screen
Press
.
[1] a k
[MENU]: EXIT
[MENU]: EXIT
OUTPUT/INPUT SET
L-1 OUTPUT
VIDEO
L-2 INPUT
VIDEO
F
HR-S5965/5966EK-EN/p27-40
2/19/03, 04:10 PM
37