Toshiba 2051c Manual Do Utilizador

This section describes the names and operations of the equipment, control panel and touch panel.

The stack of originals is scanned one sheet at a time. Both 
sides of the originals can be scanned. A maximum of 100 
sheets (80 g/m

2

 or 20 lb. Bond) can be placed in one go. 

(The maximum number of sheets that can be set may vary 
depending on the media type of the originals.)

Keep the manual in this pocket.

Use this terminal when connecting this equipment to a PC 
with a commercially available USB cable.

Use this connector when connecting this equipment to a 
network.

Use this connector when printing files stored in a USB 
device or storing scanned data into the USB device.
The Front USB Cable is required for using the USB port.

This unit makes copies on both sides of the paper. Open it 
when paper misfeeds occur.

Use this to perform printing on special media types such 
as OHP film, etc.
&

Use this to place paper on the bypass tray.

Open this cover when releasing paper misfed in the 
drawer feeding area.

Open this cover when releasing paper misfed in the Paper 
Feed Pedestal or Large Capacity Feeder.

The size of the paper set in the drawer can be checked.

Use the Paper Feed Pedestal to add one drawer. The 
Additional Drawer Module can be installed in this device.
A maximum of 550 sheets (80 g/m

2

 or 20 lb. Bond) of plain 

paper can be placed in one go.
A maximum of 2000 sheets (80 g/m

2

 or 20 lb. Bond) of 

plain paper can be placed in the Large Capacity Feeder.

Use the Paper Feed Unit to add the second drawer. A 
maximum of 550 sheets (80 g/m

2

 or 20 lb. Bond) of plain 

paper can be placed in one go.

A maximum of 250 sheets of plain paper can be placed in 
one go.
&

 P.15 “Placing paper” in this manual