Fujitsu MB2198-01 Manual Do Utilizador

i

■

Thank you for purchasing the LQFP-176P Header Type 3 for the DSU-FR Emulator (MB2198-
301) .
This product is used together with the BGA-660P adapter for the DSU-FR Emulator (MB2198-
300) *

1

 to connect the DSU-FR Emulator (MB2198-01) *

2

 and FR-DSU cable (MB2198-10) *

3

 to a

user system that uses a MB91460 series Fujitsu FR *

4

 microcontroller (LQFP-176P) *

5

.

This manual describes how to use the LQFP-176P Header Type 3 for the DSU-FR Emulator. Please
read the manual carefully before using.
Please contact your Fujitsu sales or support representative for details of which production and eval-
uation MCU models can be used with this product.

*1 :  referred below as the "adapter"

*2 :  referred below as the "emulator"

*3 :  referred below as the "DSU cable"

*4 :  FR is an abbreviation of FUJITSU RISC CONTROLLER and is a product of Fujitsu.

*5 :  The package is the FPT-176P-M07 (0.5 mm lead pitch, 24 mm 

× 24 mm body size).

■

This manual contains important information relating to the safe use of this product. Please read this
before using the product and use the product correctly in accordance with the instructions in this
manual.
In particular, carefully read "Caution of the products described in this manual" at the beginning of
this manual and "

2.Precautions When Using this Product

" to understand the requirements for safe use of

the product before using it.
After reading the manual, keep it handy for future reference.

■

The specifications of this product are subject to change without notice.
Also, please note that Fujitsu accepts no responsibility for any consequences that result either direct-
ly or indirectly from the use of this product.

■

This product has an operating temperature range of 5 

°C to 35 °C and an operating humidity range

of 20 % to 80 %. Use the product in an environment that is free of condensation and avoid high tem-
perature or humidity.
This product consists of an open circuit board without a frame cabinet with exposed electronic com-
ponents. Accordingly, do not place other objects on top of the circuit board and do not allow the met-
al parts of the unit to come into contact with people or materials that may have a build up of static
electricity. Similarly, keep any objects that are flammable, likely to cause a short circuit, or cause
any other such problem well away from the unit when the power to the unit is turned on. Keep the
unit horizontal as far as possible and do not use in locations that are subject to vibration, dust, flam-
mable gases, or other such dangers.
If the unit is used in an environment that does not satisfy the above guidelines, there is a risk of un-
expected damage to property or injury to the user or other people in the vicinity. Also, please keep
the packaging materials supplied with the unit and reuse these if the unit ever needs to be returned
due to a fault or other reason.

■

Please refer also to the following manuals.

• DSU-FR Emulator MB2198-01 Hardware Manual
• DSU-FR Emulator DSU-FR Cable MB2198-10 Operation Manual
• DSU-FR Emulator MB2198-300 BGA-660P Adapter Operation Manual