Fujitsu MB2198-01 Manual Do Utilizador

1

This product is an option product for use with the DSU-FR emulator and is intended to support the
development of user systems that use the Fujitsu FR family of microcontrollers.
The main features of the header board are as follows.

• Used in conjunction with the adapter (separately available) to connect the user system to an

emulator.

• When using the MB91V460 to emulate an MB91460 series MCU, the header board performs

level shifting the 5 V output signals of MB91V460 or user system to 3.3 V.

Before starting to use the header board, check that the following items are all present.

• LQFP-176P header *

1

: 1

• Header board attachment screws

: 4

 (M2 

× 10 mm, 0.4 mm pitch)

• Washers

: 4

• NQPACK176SD *

2

: 1

• HQPACK176SD *

3

: 1

• Operation Manual (Japanese)

: 1

• Operation Manual (English, this document)

: 1

*1 :  Referred to below as the "header board". The header board installs the adapter I/F connector

and YQPACK176DS (Tokyo Eletech Corporation, referred to below as the “YQPACK”) .

*2 :  IC socket (Tokyo Eletech Corporation, referred to below as the "NQPACK") . Includes a ded-

icated screwdriver and three guide pins. If you provide the required screw holes in printed cir-

cuit board for user system for attaching the IC socket, you can use the highly reliable

NQPACK176SD-SL adapter socket (Tokyo Eletech Corporation, sold separately) . Please con-

tact Tokyo Eletech for details.

*3 :  IC socket cover (Tokyo Eletech Corporation, referred to below as the “HQPACK”) . Four

screws (M2 

× 6 mm, 0.4 mm pitch) are supplied for attaching the HQPACK.

Please contact Fujitsu sales or support representative for details of which mass production MCU
models can be used with this product.