Accusplit A940MXT Manual Do Utilizador

980-301

ACCUSPLIT

 

Wrist-Worn Stopwatch with Split Memory

Operating Instructions

Congratulations on your purchase of an A940MXT stopwatch  

for the wrist!  You’re about to enjoy the convenience of having  

professional timing right at your fingertips when you need it,  

plus a regular wristwatch whenever you don’t.   

SETUP
Most watches ship with a battery inter-
rupt in place to save battery life.  Turn the 
watch over and use a quarter or nickle 
to twist open the battery compartment 
hatch.  Remove clear plastic strip from 
underneath the battery.  Replace the bat-
tery, taking care to ensure that the posi-
tive (+) terminal is facing up.  Replace the 
battery compartment hatch and tighten 
with the coin, making sure that the small 
arrow points to the dot at the top of the 
watch case when you are finished.  Peel 
the simulated display sticker off the 
watch face.  

Your new watch has four modes of 
operation: 1/100th second Memory 
Stopwatch with Turbo features, a Dual 
Set-Point Timer, plus two Time-of-Day/
Date/Alarm modes. When the battery is 
enabled, your watch will come to life in 
stopwatch mode. Press the ( button to 
cycle between the modes.  

Your watch also has an Electro-Lumines-
cent (EL) backlight.  Press the EL button 
to activate the backlight.

STOPWATCH MODE
The watch features a professional timing 

circuit with powerful stopwatch features.  

This is how the display looks when in 

stopwatch mode.

0:32:29

.

38

0:05:03

.

1 1

A

C C

U S P L I T

∞

  

L

4

SPLIT

Master Reset
Its a good idea to reset the stopwatch 

each time before use.  Push S2 for 2 sec-

onds to Reset**

Event Timing
Event timing is the simplest form of tim-
ing. It is good when you want to mea-
sure the total time from the start to the 
finish of a particular event.

S2 – Start

S2 – Stop (Display shows “SPLIT”)

S2 (2sec) – Reset**

Dual Split Memory with Split Counter 
When timing an activity with pauses  

or repeated events, you will need to  
use split timing with memories. 

S2 – Start (Shows Running DUAL Time)

S2 – Split* (Top shows CUM 1, Bottom  
  shows LAP 1)

S2 – Split* (shows CUM 2, Bottom shows  
  LAP 2) 

S2 – Split* (Top shows CUM 3, Bottom  
  shows LAP 3)

S2 – Split* (Top shows CUM 4, Bottom  
  shows LAP 4)

S2 (2sec) – Reset**

*Split Counter always shows Current Split 

Note: You can always press S1/S4 to return  

to Running Time.

Memory Review (before Resetting)
M – Review* (Bottom shows AVE LAP  
  Split, Top shows TOTAL ELAPSED TIME)

M – Review (Shows last DUAL Split)

M – Review (Shows next DUAL Split, in  
  reverse order)

*Reviews at any time in reverse numerical 

order. Hold down for Rapid Review.

STOPWATCH AND SPEED/RATE
The advanced “Turbo” functions on 
the watch calculate speed or rate once 
distance has been input into the watch 
(recall that Rate = Units/Time). 

0 00 0

.

0

00

A

C C

U S P L I T

∞

  

L

p-hr

DIST

Speed/Rate Function Setting
S1(2sec) - Enter Turbo (Speed/Rate) Set  
  Function 

S1(4sec) – Enter set function and Reset  
  Turbo fields to zero (as for DUAL  
  SPLIT timing)

S2 – Select field to be Set (field will  
  flash)

S3 – Set field to Desired Setting

S4 – Exit Setting Function

When a Distance or Sample Count Is set 
In Turbo Set Up mode, “SPD” (Speed) 
indicator will be illuninated at bottom of 
display.  The number you enter should 
correspond to the Distance or Sample 
Count you want to use for the Speed 
or Rate Computation. “P-HR” in display 
means watch is set to compute “per 
Hour” rate, and “P-Mn” means watch is 
set to compute a “per Minute” rate. 

If you want the watch to compute in “per 
Sec” rate, divide the Distance or Sample 
Count (Strokes, Strides, Units, etc.) by 
60, then enter it. 

For example, let’s say that you are at a 
race track with a course that is one mile 
long. If you set the Distance to 1.00 and 
the rate to “P-HR,” and then time several 
laps, the Average Speed recorded by the 
watch will be in miles per hour. 

Speed/Rate Function Operation 
S2 – Start (Shows Running LAP Time)

S2 – Split* (Top and Bottom show  
  SPEED/RATE 1/LAP 1)

S2 – Split* (Top and Bottom show  
  SPEED/RATE 2/LAP 2)

S2 – Split* (Top and Bottom show  
  SPEED/RATE 3/LAP 3)

S2 (2sec) – Reset LAP and SPEED/RATE  
  to zero**

*For only chance to view Total Average 

Speed/Rate, push M.

Memory Review (before Resetting)
M – Review* (Bottom shows AVE  
  TOTAL SPEED/RATE, Top shows TOTAL  
  ELAPSED TIME)

M – Review* (Bottom shows AVE LAP  
  Split, Top shows TOTAL ELAPSED TIME)

M – Review (Shows last SPEED/RATE  
  and LAP Split)

M – Review (Shows next SPEED/RATE  
  and LAP Split, in reverse order)

*Reviews at any time in reverse numerical 

order. Hold down for Rapid Review.
**Reset before 30 hrs. (end of range) and 

rollover.

ACCUSPLIT, Inc.  •  6120 Stoneridge Mall Rd., Suite 210  •  Pleasanton, CA 94588 USA

800-965-2008  •  925-226-0888  •  FAX 925-463-0147  •  www.ACCUSPLIT.com  •  support@ACCUSPLIT.com

0:32:29

.

38

0:05:03

.

1 1

A

C C

U S P L I T

∞

  

L

4

SPLIT

L