Freestyle FS81203 Manual Do Utilizador

NOMAD

• 30 meters H2O

• Day/date/calendar

• Compass with degrees and direction

• Barometer with pressure trend

• Altimeter with cumulative ascent

and descent

• 99 lap memory chronograph

• Countdown timer

•  5 Alarms

•  EL backlight

S1 – Start/split Button

S2 – Stop/reset Button

S3 – Mode Button

S4 – Light/adjust Button

S2

S3

S1

S4

The watch has eight display modes:

TIME, COMPASS (COMP), ALTIMETER

(ALTI), BAROMETER (BARO),

CHRONOGRAPH (CHRO), TIMER,

ALARM and TEMPERATURE (TEMP).

To change from one display mode to

another, press S3 button once. The

mode description will appear for

around 2 seconds before the selected

mode is activated.

Press S4 button to turn on the

backlight for 3-5 seconds.

In any setting/viewing mode, if there

is no key manipulation for around 1-

2 minutes, the watch will automatically

save the entered data and exit the

setting/viewing mode.

1. Press S3 button to select TIME 

mode.

2. Press S4 button for around 3 

seconds.The message “Set-Time”

will be displayed.

3. Press S3 button once, the hour 

digits will blink.

4. Press S1/S2 button to set the hour

digits. Holding down the button will

speed up the process.

5. Press S3 button once, the minute 

digits will blink.

6. Press S1/S2 button to set the 

minute digits.

7. Follow the same pattern to set the

second, year, month, date and hour

format.

8. To set the second digits, press S1/S2

button to reset the second digits to

00.

9. To set the hour format, press S1/S2

button to toggle between 12-hour 

and 24-hour format. The P.M. 

indicator may be displayed to 

indicate the time period 12:00 A.M.

– 11:59 P.M. in 12-hour format.

10.After finish making all the settings,

press S4 button to confirm.

1. In TIME mode, press S4 button for

around 3 seconds. The message 

“Set-Time” will be displayed.

2. Press S1/S2 button to select option

mode. The message “OPTION” will

be displayed.

3. Press S3 button continuously to 

select among NIGHT, CHIME or 

BEEP mode.

4. Press S1/S2 button to activate or 

deactivate each mode.

5. After finish making all the settings,

press S4 button to confirm.

NOTE: When NIGHT mode is activated,
the NIGHT mode icon   will appear.

The backlight will turn on for 3-5

seconds when any button is pressed.

NIGHT mode will turn off automatically

after 8 hours.

1. In TIME mode, press and hold S2 

button to view T1 or T2 time zone.

2. Press and hold S2 button for around

4 seconds to swich to display T1 or

T2 time zone.

3. Follow the same pattern to toggle 

between displaying T1 and T2 time

zones.

1. In TIME mode, press and hold S1 

button to view calendar or 

temperature.

2. Press and hold S1 button for 4 

seconds to switch to display 

calendar or temperature.

3. Follow the same pattern to toggle 

between temperature and calendar

displays.

1. Press S3 button to select COMPASS

mode. The direction, degree and 

time will be displayed.

NOTE: In COMPASS mode, if there is

no key manipulation for around 30

seconds, the compass sensor will be

deactivated for power saving. Press

S1/S2/S4 button to re-activate the

compass sensor. If the compass

sensor is deactivated for around 10

minutes, the watch will automatically

return to TIME mode.

NOTE: This moving dot represents the

direction of North (N).

In COMPASS mode, press S1 button to

take a “mark angle”. A new mark will

blink to indicate the marked direction

and a new “mark angle” (in degree)

will be displayed.

1. Press S1 button to take another 

“mark angle”.

2. Press S2 button to return to 

COMPASS mode.

1. In COMPASS mode, press S2 button

to display to display the previous 

“mark angle”.  A mark will blink to

indicate the previously marked 

direction and the previous “mark 

angle” (in degree) will be displayed.

2. Press S2 button again to return to

COMPASS mode.

1. In COMPASS mode, press and hold

S4 for around 3 seconds. The 

message “CALIB” will be displayed.

2. Press S3 button to start the 

calibration.

3. When the message “2-TURN” is 

displayed, a series of moving dots

will be displayed at the rim of the 

display and increase in clockwise 

direction. Rotate the watch 

horizontally in counter-clockwise 

direction in order to freeze the last

moving blinking dot to stay at 12-

hour position.

4. When the watch is rotated 

completely for 360 degrees, the 

message “1-TURN” will be 

displayed. Rotate the watch again 

in counter-clockwise direction.

5. To interrupt and stop the calibration,

press S4 button. The message 

“DISTORT” will be displayed and 

the watch will return to COMPASS

mode after 3 seconds.

6. When the calibration is done, the 

message “DONE” will be displayed

and the watch will return to 

COMPASS mode after 2 seconds.

1. In COMPASS mode, press and hold

S4 button for around 3 seconds. The

message “CALIB” will be displayed.

2. Press S1/S2 button to select 

declination angle setting mode. The

message “DECLIN” will be 

displayed.

3. Press S3 button, E will blink.

4. Press S1/S2 button to toggle 

between E (East) & W (West).

5. Press S3 button. The declination 

angle will blink.

6. Press S1/S2 to set the degree from

0˚ to 90˚.

7. After finish making all the settings,

press S4 button to return to 

COMPASS mode.

1. Press S3 button to select 

ALTIMETER mode.

2. The latest altitude will be displayed

in numeric and graphic formats.

1. In ALTIMETER mode, press and hold

S4 button for around 1 second. The

message “SET-ALTI” will be 

displayed.

2. Press S1/S2 button to select among

altitude setting mode (SET-ALTI), 

sea level pressure setting mode 

(SEA-Lv) or units setting mode 

(UNITS).

3. Press S3 button once to enter into

each setting mode. Press S3 button

again to return to the mode 

selection screen.

4. In altitude setting mode, press 

S1/S2 button to set the altitude 

digits.

5. In sea level pressure setting mode,

press S1/S2 button to set the sea 

level pressure digits.

6. In units setting mode, press S1/S2

button to toggle between M (meter)

and Ft (feet).

7. After finish making all the settings,

press S4 button to return to

ALTIMETER mode.

1. In ALTIMETER mode, press S2 

button to display log date and time.

2. Press S3 button or leave the watch

idle for 5 seconds to return to 

ALTIMETER mode.

1. In ALTIMETER mode, press and hold

S2 button for around 3 seconds to 

clear all statistic data and graphic

data.

NOTE: After clearing the data, the first

new data will be updated after 2

seconds and another data will be taken

in every 30 minutes.

1. In ALTIMETER mode, press S1 

button to select displaying the data

of accumulative ascent (ASCENT),

accumulative descent (DESCENT),

difference in altitude (DIFFER), rate

(RATE) or time (TIME).

2. After showing the individual data at

the bottom for around 2 seconds, 

the data in bar chart (graphic) 

format will be displayed at the top.

NOTE: To reset the difference in

altitude to zero, press and hold S1

button for around 3 seconds when the

difference in altitude data is displayed.

1. In ALTIMETER mode, press S4 

button once. The message “VIEW 

DATA” will be displayed.

2. After 3 seconds or by pressing 

S1/S2 button, the message 

“Highest” will be displayed.

3. Press S1 button to select displaying

the data of highest altitude 

(Highest), lowest altitude (Lowest),

accumulative ascent (ASCENT), 

accumulative descent (DESCENT),

difference in altitude (DIFFER) or 

the individual statistic and graphic

data recorded. Press S2 button to 

cycle the selection backward.

4. When displaying highest altitude, 

lowest altitude and the individual 

statistic and graphic data recorded,

the corresponding log time and date

will be swapping in every 2 seconds.

5. Press S3/S4 button or leave the 

watch idle for 1 minute to return to

ALTIMETER mode.

1. Press S3 button to select 

BAROMETER mode.

2. The latest sea level pressure will 

be displayed in numeric and graphic

formats.

1. In BAROMETER mode, press and 

hold S4 button. The message “Sea

-Lv” will be displayed.

2. Press S1/S2 button to select among

sea level pressure setting mode 

(Sea-Lv) or units setting mode 

(UNITS).

3. Press S3 button once to enter into

each setting mode. Press S3 button

again to return to the mode 

selection screen.

4. In sea level pressure setting mode,

press S1/S2 button to set the sea 

level pressure digits.

5. In units setting mode, press S1/S2

button to toggle between blinking 

mbar (millibar) and inHg (inch of 

Mercury).

6. After finish making all the settings,

press S4 button to return to 

BAROMETER mode.

1. In BAROMETER mode, press S2 

button to display log date and time.

2. Press S3 button or leave the watch

idle for around 5 seconds to return

to BAROMETER mode.

1. In BAROMETER mode, press and 

hold S2 button for around 3 seconds

to clear all statistic data and graphic

data.

NOTE: After clearing the data, the first

new data will be updated after 2

seconds and another data will be taken

in every hour.

1. In BAROMETER mode, press S1 

button to select displaying the data

of sea level pressure (SEA-Lv), sea

level pressure change per hour 

(dP/dt) or time (TIME).

2. Press S1 button continuously to 

view data of Sea level pressure, 

dP/dt (sea level pressure change 

per hour) and Time.

3. After showing the individual data at

the bottom for around 2 seconds, 

the data in trend (graphic) format 

will be displayed at the top.

1. In BAROMETER mode, press S4 

button once. The message “VIEW 

DATA” will be displayed.

2. After around 2 seconds or by 

pressing S1/S2 button, the message

“MAX” will be displayed.

3. Press S1 button to select displaying

the data of maximum absolute 

pressure (MAX), minimum absolute

pressure (MIN) or the statistic and