Seiko 7K32 Manual Do Utilizador

85

・

After the battery is replaced with a new one, or the watch hands move improperly, follow the
procedure below. The built-in IC will be reset and the watch will resume normal operation.

How to reset the IC
1. Pull out crown “1” to the second click.
2. Press buttons 

B

and 

C

at the same time.

Before using the watch, adjust the time, barometer hands and alarm hands by referring to the
corresponding sections of this instruction manual. (Refer to “TIME SETTING”.)

Note on the battery change:
It takes 3 hours after the battery is changed or the IC is reset before the watch shows the proper
change in the atmospheric pressure by the atmospheric pressure change indicator.

■

NECESSARY PROCEDURE AFTER THE BATTERY CHANGE 

(RESETTING THE IC)

All the stored data will be erased from the memory by following the procedure. For details, refer to
“Notes on battery change”.

When button 

C

is pressed to adjust the position of the barometer hand “2”, the atmospheric pressure

change indicator automatically moves.

■TO PRESERVE THE QUALITY OF YOUR WATCH

86

●CARE OF YOUR WATCH
・The case and bracelet touch the skin directly just as underware. If they are left dirty, the edge of

a sleeve may be stained with rust of those who have a delicate skin may have a rash.

・After removing the watch from your wrist, wipe perspiration or moisture with a soft cloth. This will

prevent the watch from being soiled, adding to the life of the gasket.

<LEATHER BAND>

・When  removing  moisture  from  a  leather  band,  do  not  rub  the  band  with  the  cloth  as  this  may

discolor it or reduce its gloss. Be sure to blot up the moisture using a soft dry cloth.

<METAL BRACELET>

・Clean the watch bracelet with a soft toothbrush dipped in water or soapy water. If your watch is

not water-resistant, be careful not to get the case wet when cleaning.

<SOFT PLASTIC BRACELET>

・The bracelet made of soft plastics does not require special care. If it gets dirty, however, it may

cause  trouble  to  the  skin.  Rinse  it  with  soapy  water  from  time  to  time.  Since  it  is  a  chemical

product, it may deteriorate by the use of solvents. The band will become hardened or discolored

after several years of use. In that case, 

replace it with a new one.

・If your watch is not water-resistant, be careful not to get wet with water or sweat. When it gets

wet with water or sweat, wipe it thoroughly dry with a hygroscopic cloth.

・If  your  watch  is  5,  10  or  20  bar  water  resistant,  rinse  it  in  a  bowl  of  fresh  water  after  used  in

seawater. Do not use chemicals to wash it.

・If your watch has a rotating bezel, clean the bezel regularly. Otherwise, dust will gather under it,

making the rotation harder.