Panasonic UF-5950 Manual Do Utilizador

133

412

No data from the transmitting side.

Check with the other party.

--

414/504 Polling password does not match.

Check the polling password.

415/505 Polling transmission error.

Check the polling password.

416/417

418

Received data has too many errors.

Check with the other party.

--

420/421 Machine goes to receiving mode, but receives no 

command from the transmitting side.

1. Remote side misdial.
2. Check with the other party.

--

422/427 Interface is incompatible.

Check with the other party.

--

434

Communication error occurred while receiving.

Check with the other party.

--

436/490 Received data has too many errors.

Check with the other party.

--

456

• Unit received a confidential document, or was 

requested to be polled of a confidential document 
under any of following conditions.
1. Not enough space in memory to receive the 

confidential document.

2. Confidential Mailbox is full.
3. While printing received document.

• Unit was requested to relay a document.

1. Print a File List, and check the contents.
2. Wait until unit finishes printing.

490

(See Info. Code 436 above)

    --

493/494 Communication error occurred while receiving.

Check with the other party.

--

495

Telephone line disconnected.

Check with the other party.

--

501/502 Communication error occurred using the internal V.34 

Modem.

Check with the other party.

--

504

(See Info. Code 414 above)

    --

505

(See Info. Code 415 above)

    --

540/541 
542/543

544

Communication error occurred while transmitting.

1. Reload the document and send again.
2. Check with the other party.

--

550

Telephone line disconnected.

Check with the other party.

--

553/554

555

Communication error occurred while receiving.

Check with the other party.

--

580

Sub-address transmission to a unit that has no Sub-
address function.

Check the remote station.

581

Sub-address Password transmission to a unit that has 
no Password Sub-address function.

Check the remote station.

623

No document loaded on the ADF.

Reload the document and, send again.

--

630

Redial was not successful due to a busy line.

Reload the document and, send again.

--

631

During dialing, STOP was pressed.

Reload the document and, send again.

--

634

Redial was not successful due to no response from 
the called station, or wrong number dialed.

Note: If busy tone was not detected, the machine will

 

 only redial once.

Check the telephone number and, send again.

--

638

Power failure occurred during the communication.

Check the power cord, and plug.

800/816

825

Unit was requested to relay a document, or 
Confidential Communication but has no capability.

Check with the other party.

--