Sagem 840 Manual Do Utilizador
5 - Installation in Mac OS X
SAGEM F@st™ 800 / 840 (PPP) User Guide - 288 047 975-02
Page 5-10
Page 5-10
Reproduction and communication prohibited without the written permission of Sagem Communication
5.3 Status of the SAGEM F@st
TM
800 / 840 modem
5.3.1
Checking installation of the SAGEM F@st
TM
800 / 840
1
Click the
(Apple) menu in the
menu bar, select "System
Preferences" and then click the
"Network" icon.
The screen opposite appears.
The Location: field should show
ADSL USB PPPoE / PPPoA, except
in the case mentioned § 5.2.1-
Preferences" and then click the
"Network" icon.
The screen opposite appears.
The Location: field should show
ADSL USB PPPoE / PPPoA, except
in the case mentioned § 5.2.1-
of
step No1.
If the network port is well set, a
different display is not prejudicial to
the good running of the modem.
If the network port is well set, a
different display is not prejudicial to
the good running of the modem.
The Show: field should display
"Ethernet adaptor (en x)", where "x"
is a number assigned by the operating
system.
If it is not the case, click in the Show:
field and then select that adaptor in
the scroll list.
"Ethernet adaptor (en x)", where "x"
is a number assigned by the operating
system.
If it is not the case, click in the Show:
field and then select that adaptor in
the scroll list.
Select the TCP/IP tab.
In the panel, the Configure: field
should show Using PPP
In the panel, the Configure: field
should show Using PPP
2
Select the PPPoE tab and the panel
opposite appears.
opposite appears.
Make sure that the "Connect using
PPPoE" box is checked and that the
"Name" and "Password" fields are
completed.
PPPoE" box is checked and that the
"Name" and "Password" fields are
completed.