Sagem MyX2-2m Manual Do Utilizador

18

My phone in 5 minutes

You are now ready to use your phone for the first time.
Switch on the phone by pressing the Start   key. A short display appears.

This is your SIM's secret code.
If access to the SIM card is protected, the phone prompts you to enter the PIN number:
Enter the code between 4 and 8 digits given to you when the SIM card was issued. These digits do not appear on the screen 

for security reasons. 
Press the right programmable key  

to 

accept. 

If your phone indicates that the SIM is missing, press the Stop   key to switch off your phone and check that the SIM card 

is correctly installed.

If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:

-

Enter "**05*".

-

Enter the PUK (Personal Unblocking Key) code provided by your operator, and accept.

-

Enter your PIN number and accept. 

-

Enter your PIN number again and accept.

After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then 

contact your operator or your SMC to obtain a new card. 

251959374_myX2-2_lu_en.book  Page 18  Mercredi, 30. mars 2005  11:48 11