Sanyo Katana Manual Do Utilizador
14
Pho
n
e Ba
s
ics
Installing the Battery
To install the Li-Ion battery:
1.
Insert the battery into the opening on the back of the
phone at a 45-degree angle, making sure to line up the
gold contacts. Gently press down until the battery
snaps into place.
phone at a 45-degree angle, making sure to line up the
gold contacts. Gently press down until the battery
snaps into place.
2.
Install the protective cover by lining up the tabs at a
45-degree angle, and gently press down until the cover
snaps into place.
45-degree angle, and gently press down until the cover
snaps into place.
Removing the Battery
To remove your battery:
1.
Make sure the power is off so that you don’t lose any
stored numbers or messages. Remove the protective
cover by pressing the release latch and pulling up on
the back of the cover.
stored numbers or messages. Remove the protective
cover by pressing the release latch and pulling up on
the back of the cover.
2.
Use your thumbnail to lift and then remove the battery
as indicated in the diagram.
as indicated in the diagram.
WARNING
Do not handle a damaged or leaking Li-Ion battery as
you can be burned.
you can be burned.