Kenwood KAC-7404 Manual Do Utilizador

English

Safety precautions

2WARNING

To prevent injury or fire, take the following
precautions:

• When extending the ignition, battery, or ground

wires, make sure to use automotive-grade wires
or other wires with a 5 mm² (AWG 10) or more to
prevent wire deterioration and damage to the wire
coating.

• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools) inside
the unit.

• If the unit starts to emit smoke or strange smells,

turn off the power immediately and consult your
Kenwood dealer.

• Do not touch the unit during use because the

surface of the unit becomes hot and may cause
burns if touched.

• Mounting and wiring this product requires skills and

experience. For safety’s sake, leave the mounting and
wiring work to professionals.

2CAUTION

To prevent damage to the machine, take
the following precautions:

• Be sure the unit is connected to a 12V DC power

supply with a negative ground connection.

• Do not open the bottom covers of the unit.
• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.

• When replacing a fuse, only use a new one with the

prescribed rating. Using a fuse with the wrong rating
may cause your unit to malfunction.

• To prevent a short circuit when replacing a fuse, first

disconnect the wiring harness.

NOTE

• If you experience problems during installation,

consult your Kenwood dealer.

• If the unit does not seem to be working right,

consult your Kenwood dealer.

To prevent battery from running out

When the unit is used in the ACC ON position without
turning the engine ON, it depletes the battery. Use it
after starting the engine.

Cleaning the unit

If the front panel gets dirty, turn off the power and
wipe the panel with a dry silicon cloth or soft cloth.

2 CAUTION

Do not wipe the panel with a hard cloth or a cloth
dampened by volatile solvents such as paint thinner
and alcohol. They can scratch the surface of the panel
and/or cause the indicator letters to peel off.

Protection function

The protection function is activated in the following
situations:
This unit is equipped with a protection function for
protecting this unit and your speakers from various
accidents or problems that can occur.
When the protection function is triggered, the Power
indicator goes off and the amplifier stops operating.
•  When a speaker wire may be short-circuited.
•  When a speaker output contacts ground.
•  When the unit malfunctions and a DC signal is sent

to the speaker output.

• When the internal temperature is high and unit

won’t operate.

• When a ground wire of the center unit (cassette

receiver, CD receiver, etc.) or this unit is not
connected to a metal part serving as an electrical
ground passing electricity to the battery's negative
- terminal.

B64-3922-00_00_KE.indb 2

07.11.15 11:27:21 AM