Star Trac 7600 Manual Do Utilizador

 

Service Manual: E-TR and E-TRi 

 

10

This section provides a comprehensive list of factory recommended PM requirements, along with 
detailed procedures for performing each task. 
 

 

Wipe down all surfaces including:  

Display, handrails shroud and heart rate grips. 

9

Clean under the running belt (soft cloth only) 

9

Visually inspect running belt for alignment and tension 

9

Ensure the power cord is not under the treadmill 

9

Vacuum floor under and around treadmill 

9

Inspect inside surface of running belt and top of deck 

9

Correct any display or handrail squeaks and rattles 

9

Visually inspect display panel (keypad) for wear 

9

Vacuum inside shroud 

9

Visually inspect the drive belt 

9

Visually inspect the power cord for pinches or breaks 

9

Wipe clean and lubricate elevation screws 

9

Change belt and flip/new deck 

9 

Running belt & deck rewaxing

 

The Pro Tread models 7600 and 7700 are equipped from the factory with a “Waxless” running belt 
and deck system.  It is not necessary to regularly wax, rewax or lubricate the running belt and deck. 
Wax may be applied to alleviate running belt noise (see waxing instructions).