Star Trac 7600 Manual Do Utilizador

 

Service Manual: E-TR and E-TRi 

 

14

 

 

 

 

 
You must install a new belt and new deck surface together.  Most Star Trac decks are double-sided 
so they can be flipped to utilize both sides.  Failure to install a new belt over a fresh deck surface will 
cause the belt to burn along the center walking area, the edges will curl, electrical components will 
create so much heat as to begin to fail, and will not be covered under warranty. 
 
The Pro Tread models 7600 and 7700 are equipped from the factory with a “Waxless” running belt 
and deck system.  It is not necessary to regularly wax, rewax or lubricate the running belt and deck 
on these models. Wax may be applied to alleviate running belt noise (see waxing instructions). 
 
During a non-belt and/or deck related service, if a running belt and/or deck are removed, it may be 
acceptable to re-install the belt and deck as long as no visible signs of wear are present or the 
situation does not require replacement. 
 
If replacing a deck due to wear, it is advisable to replace the running belt as well, because wear is 
commonly caused in conjunction with the running belt. 
 
If you have questions on whether or not to replace a running belt and/or deck, contact Star Trac 
Customer Support.