Samsung SCX-5312F Manual Do Utilizador
T
ROUBLESHOOTING
8.12
MEMORY FULL
(for SCX-5312F only)
The memory is full.
Either delete unnecessary
documents, or retransmit after
more memory becomes available,
or split the transmission into more
than one operation.
documents, or retransmit after
more memory becomes available,
or split the transmission into more
than one operation.
NO ANSWER
(for SCX-5312F only)
The remote fax mahine
has not answered after
all the redial attempts.
has not answered after
all the redial attempts.
Try again. Make sure the remote
machine is operational.
machine is operational.
POLLING ERROR
(for SCX-5312F only)
The remote fax machine
you want to poll is not
ready to respond to your
poll.
you want to poll is not
ready to respond to your
poll.
Or, when setting up to
poll another fax mahine,
you have used an
incorrect poll code.
poll another fax mahine,
you have used an
incorrect poll code.
The remote operator should know
in advance that you are polling
and have their fax machine
loaded with the orginal document.
in advance that you are polling
and have their fax machine
loaded with the orginal document.
Enter the correct poll code.
NO DEVELOPER
CARTRIDGE
CARTRIDGE
The drum cartridge is not
installed.
installed.
Install the drum cartridge.
NO PAPER
The paper in the paper
cassette has run out.
cassette has run out.
Load the paper in the paper
cassette.
cassette.
RX TRAY FULL
Paper is overstacked in
the output bin.
the output bin.
Remove paper.
PAPER JAM 0
Paper has jammed in the
paper feeding area of the
cassette.
paper feeding area of the
cassette.
PAPER JAM 1
Paper has jammed in the
fuser area.
fuser area.
PAPER JAM 2
Paper has jammed in the
paper exit area.
paper exit area.
RETRY REDIAL?
(for SCX-5312F only)
The product is waiting
for a specified time
interval to redial a
previously busy station.
for a specified time
interval to redial a
previously busy station.
You can press Mode/Enter to
immediately redial, or Stop/
Clear to cancel the redial
operation.
immediately redial, or Stop/
Clear to cancel the redial
operation.
SCANNER LOCKED
The scan module is
locked.
locked.
Unlock the scanner (see
page 1.2) and press Stop/Clear.
page 1.2) and press Stop/Clear.
Display
Meaning
Solution