Coleman 9276-202 Manual Do Utilizador

Connect Frame to Tent

–Insert one pin into the end of main tent 

pole at tent corner. (illus. 3, illus. 4)

–Go to opposite end of pole and gradually 

apply pressure to the pole forming an arch
until you are able to insert the pin into the 
pole end. (works best with two people)

–Repeat for second pole.
–Insert pin into the end of side pole, go to 

opposite end of pole and apply pressure 
until you arch the pole and can insert the  
pin into the pole. (illus. 3, illus. 4)

GALILEO

™

14’x10’ 

1

Layout & Positioning 
of Tent, Pole Assembly

–Layout and position tent with doors 

facing desired directions. (illus. 1)

–Unzip doors.
–Stake down tent, using the rings on the 

stake loops. Keep the floor taut. (illus. 2) 

–Assemble frame poles by interlocking 

shock-corded poles. (three poles)

–Insert the longer black poles into pole 

sleeves as shown below. They will curve
and come out on the same side that 
they started. The shorter grey side pole 
inserts into sleeves running 
side to side. (illus. 1)

2

–Select a level campsite clear of 

rocks, branches and other hard or 
sharp objects.

–Do not set up your tent under trees.
–For best results in windy conditions, 

position the end of tent into the wind.

–See owners manual for more tips.

Front door 

Grey side pole

Assembled
poles
inserted
through 
pole 
sleeves

Instructions apply to Part Number 9276A141

illus. 1

illus. 2 

Tent stake 

through ring 

on stake loop

illus. 4

Tent frame 

set-up

Part No. 9276-202

Part No. 9276-203

Part No. 9276A204

illus.3
Insert pin into pole end

Grommets for 
rainfly poles