Uniden 880 Manual Do Utilizador

17

Using MEM/SCAN does not 

access channels in memory

Verify that there are channels saved into 

memory.

Unit does not work as well as 

previously.

Turn the power off then back on. The channels 

will reset.

Battery power check returned 

FAILLO 

or

 FAILHI

.

Make sure your power wires have a good 

connection.

Check your battery charge; it needs to be fully 

charged. Lower voltage will cause a failure.

Check your alternator.

Antenna check returned 

FAIL

.

Make sure your antenna ground is good.

Check for damage to the antenna.

Check the SWRs at a CB shop. High SWRs will 

damage the radio.

RF power diagnosis check 
returned 

FAIL

.

Make sure your antenna ground is good.

Check for damage to your antenna.

Check the antenna connection on the back of 

the radio. Be sure it is tight.

If you do not get satisfactory results after performing these checks, call 

the Uniden Customer Service Center at 1-800-297-1023, 8:00 a.m. to 5:00 

p.m. CST, Monday through Friday.

Technical information, diagrams, and charts are provided on request. It 

is the user's responsibility to see that this radio is operating at all times 

in accordance with the FCC Citizens Radio Service regulations. We highly 

recommend that you consult a qualified radio/telephone technician for 

servicing and aligning this CB radio product. 

GENERAL
Channel:

40

Frequency Range:

26.965 - 27.405 MHz

Frequency Control:

PLL Synthesizer