Uniden 880 Manual Do Utilizador

6. Channel Selector/MENU/OK. Press the inner MENU/OK button to

select a menu option or other selection. Turn the outer Channel

Selector knob to:

Select channels

Select menu modes

Change scan resume direction (up or down)

Control Talkback volume

Control Mic gain level

Control Calibration volume

All channels except Channel 9 may be used for normal communication. The FCC

reserves Channel 9 for emergencies involving the immediate safety of individuals

or protection of property. Use Channel 9 to render assistance to a motorist.
This is an FCC rule and applies to all CB operators.

7. Microphone socket.

8. Indicators turn on when the function is turned on.

9. S/RF/CAL/SWR: Push to to check RF signal strength, calibration,

and SWR reading.

10. CB/PA: Selects CB (Citizens Band) or PA (Public Address).

Do not use the pa function unless an external speaker is connected.

11. MEM/SCAN: Press to start or stop scanning modes [All Channel

Scan (see page 10) and Memory Scan (see page 12)]. Press and hold

to set or clear channel memory while in Memory mode.

12. 9/19/NORM: Press to switch between emergency channel 9,

channel 19, and standard CB channels.

13. Frequency Display: Displays the MHz of the selected channel. Also

displays menu options.

14. ANL: Turns ANL (Automatic Noise Limiter) feature on and off.

ANL reduces external noise.

15. NB: Turns NB (Noise Blanker) feature on and off. NB reduces

interference from vehicle ignition systems.

16. RF Gain knob: Improves reception in strong signal areas.