Nokia RV-1 Manual Do Utilizador

Bluetooth wireless technology

successfully paired, you do not need to repeat this procedure 
when establishing further Bluetooth wireless connections 
between the devices. However, you can delete a device from the 
list of paired devices. If you wish to establish a Bluetooth 
wireless connection to this device again later, you must pair it 
with the car kit.

To ensure interoperability with the devices from different 
manufacturers, the Bluetooth standard defines so-called 
profiles for many applications. The Nokia 616 car kit supports 
the following Bluetooth profiles: 

y

SIM access profile to connect to a compatible mobile phone 
and use the remote SIM card installed in the mobile 

y

Hands-free profile to connect to a compatible mobile phone

y

Hands-free profile or headset profile to connect to a 
compatible wireless headset

The Bluetooth function is always activated in your car kit. 
However, in other devices with Bluetooth technology (for 
example, mobile phones), Bluetooth may have to be activated 
or deactivated in the device. Make sure that Bluetooth is active 
in all devices supporting Bluetooth wireless technology that 
you wish to use with your car kit and that the device is visible 
for your phone (see “Car kit visibility” on page 63). For further 
information, see the user guide applicable for the device with 
Bluetooth technology that you are using.

To create a connection using Bluetooth wireless technology, 
you must exchange Bluetooth passcodes with the device you 
are connecting to for the first time for reasons of security. This 
operation is called pairing. The Bluetooth passcode is a 1- to 
16-character numeric code, which you must enter in both 
devices. You only need this passcode once. 

In SIM access mode, if the car kit finds a compatible mobile 
phone that supports the Bluetooth SIM access profile standard, 
the car kit shows a randomly chosen, 16-character numeric 
code on the display, which you must enter on the compatible 
mobile phone to be paired with the car kit. Note that you must 
be prepared to do this quickly within 30 seconds. Follow the 
instructions on the display of your mobile phone. 

If pairing is successful, 

Paired with

, followed by the name of 

your mobile phone is displayed. Then 

Create connection

 is 

displayed. Press 

 to establish the Bluetooth wireless 

connection. 

When pairing a mobile phone in SIM access mode, a 16-
character numeric passcode is generated in the car kit. 
You can delete this passcode if desired: within 3 
seconds, press 

 to delete the Bluetooth passcode. 

Then enter an arbitrary 16-character numeric code into 
the car kit using the Navi wheel number editor.