Nokia CR-102 Manual Do Utilizador
ENGLISH
To detach the mounting device from the
windscreen, carefully push the locking lever
toward the top of the mounting device (3),
and pull the strap located on the edge of the
suction cup (4).
windscreen, carefully push the locking lever
toward the top of the mounting device (3),
and pull the strap located on the edge of the
suction cup (4).
Set to the desired position
Do not adjust the mounting device while driving.
To set the top of the mounting device to the
desired position, loosen the two screws in the
middle of the mounting device, turn the top
to the desired position, and tighten the
screws (5). Ensure that the top of the device
is firmly locked into place.
desired position, loosen the two screws in the
middle of the mounting device, turn the top
to the desired position, and tighten the
screws (5). Ensure that the top of the device
is firmly locked into place.
To set the mounting plate at the top of the
mounting device to the desired position, loosen the screw below the
plate, turn the plate to the desired position, and tighten the screw (6).
mounting device to the desired position, loosen the screw below the
plate, turn the plate to the desired position, and tighten the screw (6).