Q-See QT426 Manual Do Utilizador

CHAPTER 4 MAIN MENU SETUP

4.9 ADVANCED

In this set of commands, the user can erase all the settings, import or export data files to
and from the DVR and control who can remotely access the DVR through three submenus:
Reset, Import/Export and Black/White List.

PICTURE 4-49

PICTURE 4-51

RESET

Clicking on this option will open a warning
dialogue asking you to confirm that you wish
to remove all settings and reboot the system.
You must select OK to continue with the reset
or hit CANCEL to exit without changes.

BLOCK/ALLOW LIST

From here, an authorized user can control which computer users are allowed to access the
DVR.

The Block List is used to deny access to remote computers within a certain IP address
segment.
The Allow List is used to permit access by users from select IP address segments.

EXAMPLE: You wish to block access to the DVR from computer users within the IP address
segment ranging from 196.168.000.002 to 196.168.000.004. Select the Block button and
then enter the first segment in the

IP From field and the last address within the segment in

the

To field. You may add additional segments before hitting Apply to save your settings and

then exiting this window.

IMPORT/EXPORT

Use this interface to export select data files
to mobile Flash drives or an external USB
drive through the backup function. Specific
data files can also be retrieved from mobile
or external storage devices and recorded
onto the DVR.

PICTURE 4-50

4.10 FILE SEARCH, PLAYBACK AND MANAGEMENT

Access the recordings on the DVR, play them back and backup the recordings to an external
storage device.

NOTE! Throughout this window, if the screen resolution is VGA 800*600,
the time search interface will show a hide button. Clicking on this button will
expand or minimize the entire interface as needed.

Four submenus appear in this section:

Time

Search, Event Search, File Management
and

Image.

TIME SEARCH

Search for an event within a range of dates and times.

PICTURE 4-52

PICTURE 4-53

Select which channel you wish to search and the screen display mode. The Calendar icon in
the

Start Time window allows you to select a start date. Highlighted dates indicate that there

is recorded data for those days.
The vertical column of numbers to the left of the grid are the available channels. The horizontal
headings are blocks of time within the day.
You can select which time to begin the review by entering it in the start time window or clicking
on the time grid and moving the yellow line to the approximate start time.
Clicking on the PLAY button will begin the playback from the time selected. It will also bring up
a playback toolbar allowing finer control of the playback process.

01/27/2010 09:30:00

09:48:04

09:59:59

Play/

Pause

Rewind

Screen Display

Mode

Volume

Hide

Tool Bar

Exit

Frame

Advance

Record

Play/

Pause

Stop

Fast

Forward